Abstract:ZnMoO2S2·H2O and ZnMoS4 were synthesized in laboratory. Their thermal stability was investigated by means of thermogravimetric analysis (TGA), and their lubricating characteristics at temperatures up to 500°C were examined by sliding a Sialon ceramic ball against a W18Cr4V steel disc on a high temperature ball-on-disc tribometer. The morphologies and the elemental distributions in the worn surfaces of the ceramic ball were observed and determined by scanning electron microscopy (SEM) equipped with energy dispersion spectrometry (EDS). The chemical states of some typical elements in the worn surfaces of the ceramic ball were explored with X-ray photoelectron spectroscopy (XPS). As the results, both ZnMoO2S2·H2O and ZnMoS4 showed good lubricity for Sialon ceramic/W18Cr4V steel pair from room temperature to 400°C. The XPS analytical results indicate that both ZnMoO2S2·H2O and ZnMoS4 experienced tribochemical reactions during the friction process at 300°C, thereby generating S and Mo of higher valence. SEM observations of the worn surfaces of the Sialon ceramic ball show that a surface protective film composed of the lubricants and their decomposed products was formed thereon, which contributes to keep the sliding surfaces off contact and abate the adhesion and scuffing on the lubricated surfaces, therefore to decrease the friction coefficients.

Study on oxidation dynamics of different Z value beta Sialon

Study on Oxidation Dynamics of Different Z-Value β-Sialon

The Thermal Stability and Lubricity of Zinc Thiomolybdenate at Temperatures Up to 500°C

Oxidation Behavior of Β-Sialon Powders Fabricated by Combustion Synthesis

Oxidation Behaviour of C–SiC–ZrC Composite

Effect Of Z Values On The Microstructure And Mechanical Properties Of Post-Sintered Reaction Bonded Beta-Sialon

Static and dynamic oxidation behaviour of silicon carbide at high temperature

Erosion of BF slag to different Zeta value beta Sialon and the fractal dimension of reaction interface

Fabrication and Liquid–solid, Two-Phase Erosion Wear Behaviour of Β-Sialon Ceramic from Pyrophyllite by Carbothermal Reduction and Nitridation

Sintering of<Emphasis Type="Italic">β</Emphasis>-sialon with 5mol% Y<Subscript>2</Subscript>O<Subscript>3</Subscript>-ZrO<Subscript>2</Subscript> additives

High-temperature strength and oxidation behavior of Sc3+/Lu3+ co-doped α-sialon

A Technique for Ultrahigh Temperature Oxidation Studies of Zrb2-Sic

Preparation and Oxidation of Bauxite-Based Β-Sialon-bonded SiC Composite

Hot strength and microstructure of β-sialon-Al2O3-SiC composites

Oxidation Kinetics of Hot-Pressed ZrB2–SiC Ceramic Matrix Composites

Reaction Sintered Fe–Sialon Ceramic Composite: Processing, Characterization and High Temperature Erosion Wear Behavior

Oxidation Behavior of Sic Platelet-Reinforced Zrb2 Ceramic Matrix Composites

Oxidation Behaviors of the Pressureless Sintered ZrB<SUB>2</SUB>-SiC Composites: Oxidation Behaviors of the Pressureless Sintered ZrB<SUB>2</SUB>-SiC Composites

The Tribological Properties and Wear Mechanism of Copper Coated Graphite Doped Sialon Ceramic Composites at Wide Range Temperature from 25 to 800 °C

Tribological study of Sialon lubricated by water-based lubricants

Effect of atomic oxygen on oxidation behavior of ZrB2-SiC ceramic composite materials