Abstract:Coal gasification fine slag is a by-product of the entrained-flow gasifier, which has caused some environmental pollution. Through acid dissolution and calcination at different temperatures, mesoporous spherical silica/porous carbon composite filler was prepared using coal gasification fine slag. The particle size and specific surface area of the composite filler decreased with the decrease of unburned carbon content. The analysis of X-ray photoelectron spectroscopy (XPS) indicated the decrease of oxygen-containing functional groups and the increase of C-C groups with the decrease of the content of carbon. The effects of mesoporous spherical silica/porous carbon with different carbon content on the comprehensive properties of filled polypropylene (PP) were studied. The tensile strength and interface interaction increased at first and then decreased with the decrease of carbon content, due to the synergistic effect of mesoporous spherical silica and rough amorphous carbon. The scanning electron microscope showed that the composite filler with the carbon content of 14.47 wt.% at the calcination temperature of 450 °C had the best compatibility with the matrix. Thermodynamic analysis of the PP composites indicated that thermal insulation properties and thermal stability improved with the incorporation of the composite filler. Differential scanning calorimetry (DSC) testing indicated the highest crystallinity of the matrix corresponding to the best comprehensive performances of the composites. XRD patterns revealed that the cooperation of fillers brought characteristic peaks and did not change the primary crystal structure of PP. Simultaneously, heavy calcium powders (CC) were used as comparative fillers, and the overall properties of the PP composites filled with the composite filler were better compared to those of the CC-filled PP composite. The results illustrated that mesoporous spherical silica/porous carbon particles can completely replace CC used in the PP composites, which can be used in auto bumpers, plastic pipes, display cases, and car air deflectors. The CGFS can be processed into a plastic filler for substituting heavy calcium powder particles, which can solve the environmental pollution caused by the accumulation of solid waste.

PREPARATION OF INDUSTRIAL MINERAL COMPOSITE POWDERS AND THE APPLICATION IN PP COMPOSITES

Enhancement on the properties of polypropylene using bamboo particles: Effect of particle sizes and loadings

Polyolefin nanometer compound material and its preparation technology

Mechanical and Thermal Properties of Polypropylene (PP) Composites Filled with CaCO3 and Shell Waste Derived Bio-Fillers

Surface Modification of Shell Waste and Its Application in Polypropylene Composites

Preparation of composite ground calcium carbonate in Ca(OH) 2-H 2O-CO 2 system and characterization

PREPARATION PROCESS AND INTERFACE MODIFICATION ON THE MECHANICAL PROPERTIES OF BAMBOO FIBER/ POLYPROPYLENE CARBONATE COMPOSITES

Preparation of Composite Ground Calcium Carbonate in Ca(OH)2–H2O–CO2 System and Characterization

Study on the Preparation and Properties of Caco3/Polypropylene Composite Materials

Modification Of Mechanical And Color Properties Of Polypropylene With Colored Nano-Sio2 Prepared From Diatomite

Preparation, Characterization And Filling Effect Study Of Dye-Loaded Shell Powder On The Properties Of Ldpe Composite

The preparation and evaluation mechanism of mesoporous spherical silica/porous carbon-filled polypropylene composites obtained from coal gasification fine slag

Surface morphology study of powder

Modification of mechanical and color properties of polypropylene with colored nano‐SiO<sub>2</sub> prepared from diatomite

Preparation of cellulose-PCC fibre hybrids: Use as filler in polypropylene (PP) composites

Preparation of composite wollastonite powder with nano structure surface

Application of a Rare Earth Coupling Agent in Polypropylene/Mineral Composites

Preparation of a water-based carboxylated Poly(phthalazione ether nitrile) sizing agent for interfacial reinforcement of CF/PPESK composites

Investigation Into Poly(propylene)/Montmorillonite/Calcium Carbonate Nanocomposites

Preparation of Epoxy Resin/Caco3 Nanocomposites and Performance of Resultant Powder Coatings

Modification of Polypropylene with Composite Nucleating Agents Containing 2,2-Methylene-bis-(4, 6-di-t-butylphenylene) Phosphate/Attapulgite/Silica Nano-particles