Abstract:Earthquakes contain complex components in both the horizontal and vertical directions. However, most vibration control strategies work only in a single direction. The existing multi-dimensional isolation devices usually have complex designs and low damping ratios; hence, the stability of structures that incorporate the devices is currently insufficient. This study designs a novel multi-dimensional isolation and mitigation device based on viscoelastic damping technology (VE-MDIMD). The device consists of a core bearing and several cylindrical dampers, providing vibration control capacity in both the horizontal and vertical directions and a strong uplift resistance. To evaluate the device's performance, a series of dynamic tests are conducted on the cylindrical damper utilized in the device. The results show that the damper's mechanical properties exhibit a pronounced dependence on the frequency and amplitude, and its hysteresis curves become obviously nonlinear with increased deformation. Subsequently, to describe the behavior of the VE-MDIMD, a mechanical model is established which combines the construction of the device and the characteristics of the damper. Considering the limitations of existing models in fully capturing the nonlinear behavior of the damper, a novel multi-scale model is proposed based on the microstructure of viscoelastic material. The experimental verification confirms that the model can accurately capture the frequency and amplitude dependence, as well as the nonlinear hysteresis behavior, of the damper. Finally, the effectiveness of the VE-MDIMD is evaluated through the dynamic analysis of an actual structure. The arrangement of the device in the structure is optimized based on a multi-objective genetic algorithm available in Matlab (R2019b) and OpenSEES (Version 3.0.0). The results demonstrate the device's superiority in controlling both horizontal and vertical vibrations in the superstructure.

Horizontal Pseudo-Dynamic Experimental Study on Long-Span Reticulated Structures with Multi-Dimensional Earthquake Isolation and Mitigation Devices

Seismic response of a large span single layer reticular dome with surrounding columns considering horizontal wave passage effect

Structural Isolation and Mitigation Technology under Multi-Dimensional Earthquake Excitations

Study on remote collaborative pseudo-dynamic tests of multi-story frames

Remote Hybrid Testing of Asymmetric Structures under Earthquake Excitation

Study on Dynamic Characteristics and Behavior of Cable Dome Subjected to Multi-Dimensional and Multi-Point Seismic Excitations

Remote Collaborative Pseudo-dynamic Tests of a Ten-story Concrete Filled Steel Tubular Composite Frame

Horizontal Shaking Table Tests on a Four-Story Prototype Structure Using Multi-Dimensional Earthquake Isolation and Mitigation Devices

Experimental research and numerical simulation of a large-span isolated structure considering multi-dimensional input effects

Seismic performance improvement of a three-dimensional isolated spherical reticulated shell structure using pseudo-negative-stiffness magnetorheological dampers

Shaking Table Tests on the Multi-Dimensional Seismic Response of Long-Span Grid Structure with Base-Isolation

Test, Modeling, and Vibration Control of a Novel Viscoelastic Multi-Dimensional Earthquake Isolation and Mitigation Device

Analysis model for long-span isolated structure subjected to multi-support earthquake excitations

Experimental and numerical studies of a novel three-dimensional isolation device incorporating disc springs with U-shaped dampers

Evaluation of isolation performance of, reticulated shell structures with curvature-consistent frictional pendulum isolation system through shaking table tests

Seismic analysis of two typical spatal structures under multi-support vertical excitations

Performance of a passive rate‐independent damping device in a seismically isolated multistory building

Theory ed experimentation on passive control of adjacent structures

Seismic performance of a novel 3D isolation system on continuous bridges

Seismic response analysis of super-high-rise building structures with three-layer isolation systems

Influence of ground motion duration on seismic performance of RC frame isolated by high damping rubber bearings