Abstract:Passive isolation has been widely accepted as an effective means for the protection of structures against seismic hazards. The isolation bearings, typically placed at the base of the structure, increase the flexibility of the structure and shift its fundamental frequency away from the dominant frequency of seismic excitations, resulting in significantly reduced interstory drifts and floor accelerations. During severe earthquakes, the performance of passive isolation systems is usually achieved at the expense of having large base displacements. Alternatively, active isolation combines isolation bearings with adaptive actuators to effectively mitigate the base displacements, while maintaining reasonable interstory drifts and floor accelerations. Despite successfully theoretical proof documented in previous studies, most experimental implementations only verified active isolation with unit-axial actuators under unidirectional excitations. Earthquakes are intrinsically multidimensional, resulting in out-of-plane responses such as torsional responses. Therefore, the focus of this paper is the development and experimental verification of active isolation strategies for multistory buildings subjected to bidirectional earthquake loadings. First, a model building is designed to be dynamically similar to a representative full-scale structure. The selected isolation bearings feature low friction and high vertical stiffness, providing stable behavior. In the context of the multidimensional response control, three custom-manufactured and appropriately scaled actuators are employed to mitigate both in-plane and out-of-plane responses. In addition, the structure is subjected to multi-directional earthquake ground motion. To obtain a high-fidelity model of the active isolation systems, the authors propose a hybrid identification approach, which combines the advantages of the lumped mass model and nonparametric methods. Control-structure interaction is also included in the identified model to further enhance the control authority. By employing the H-2/LQG control algorithm, the controllers for the hydraulic actuators are shown to offer high performance and good robustness. Active isolation is found to possess the ability to reduce base displacements and produce comparable accelerations and interstory drifts to passive isolation. The proposed active isolation strategies are validated experimentally for a six-story building tested on the six-degree-of-freedom shake table in the Smart Structures Technology Laboratory at the University of Illinois at Urbana-Champaign. Copyright (c) 2013 John Wiley & Sons, Ltd.

Theory ed experimentation on passive control of adjacent structures

Precast Industrial Buildings in Southern Europe: Loss of Support at Frictional Beam-to-column Connections under Seismic Actions

Study on remote collaborative pseudo-dynamic tests of multi-story frames

Remote Hybrid Testing of Asymmetric Structures under Earthquake Excitation

Remote Collaborative Pseudo-dynamic Tests of a Ten-story Concrete Filled Steel Tubular Composite Frame

Design of Passive Systems for Control of Inelastic Structures

Experimental Study of Active Control for MDOF Seismic Structures

Experiments on Active Control of Seismic Structures

Seismic Response of Adjacent Steel Structures Connected by Passive Device

Vibration control of seismic response of adjacent buildings coupled with semi-active MR dampers

Experimental Study of the Semi‐active Control of Building Structures Using the Shaking Table

Shaking table tests and numerical analysis of RC coupled shear wall structure with hybrid replaceable coupling beams

Passive vibration control in a civil structure: Experimental results

Seismic Response of Adjacent Buildings Connected by Nonlinear Viscous Dampers

Experimental and numerical investigation of a novel passive energy dissipation system with viscoelastic damper and angle-reaction controller

Effect of Embedded Basement Stories on Seismic Response of Low-Rise Building Frames Considering SSI Via Small Shaking Table Tests

Comprehensive Assessment of the Seismic Performance of an Innovative Hybrid Semiactive and Passive State Control System for a Low-Degree-of-Freedom Structure Using Real-Time Hybrid Simulation

Shaking Table Investigations on the Seismic Performance of a Steel Frame with Optimized Passive Energy Dissipation Devices

Shake table testing and computational investigation of the seismic performance of modularized suspended building systems

Does seismic isolation reduce the seismic vulnerability and the variability of the inelastic seismic response? Large-scale experimental investigation

Multiaxial Active Isolation for Seismic Protection of Buildings