Abstract:As Moore's law is running out of steam, advanced packaging has taken leadership to drive performance. On the one hand, the die area is constantly reduced especially for small package sizes and heterogeneous integration with high interconnect density becomes crucial. This is for example the case in IoT or mobile applications. On the other side, for large packages sizes heterogeneous integration and die segmentation gets an increasing role of processing applications. Here, heterogeneous integration leads to an overall increased yield, mainly as smaller dies generally can be produced with higher yield. In the same time and most importantly, memory, processors, sensors and such from different sources can be combined using heterogeneous integration. Combining segmented dies in an advanced package can be done by two different bonding technologies, namely sequential die bonding or a collective die bonding approach. For the collective bonding, individual dies are populated and tacked either on an interposer or a so-called handling carrier, depending on the bonding technology applied. In case of tacking die face-down on an interposer or other active silicon die, bonding is usually being done by thermal bonding. Here, heating and cooling of the substrates are only done once, considerably reducing process cost and thermal budget of the underlying substrate. The second case is tacking the dies face up on a carrier substrate. This reconstructed dies on a carrier can now be processes again on wafer scale, this means preprocessing steps such as direct bonding can be done before bonding the wafers using fusion or hybrid bonding. In this paper, we will show different integration approaches for collective die bonding for both thermal bonding as well as fusion / hybrid bonding. For both processes, results in terms of die placement and sequential alignment accuracy of the integrated process will be compared and discussed, together with current and potential applications of these processes for future devices.

(Invited) Heterogeneous Photonic Integration by Direct Wafer Bonding

Photonic wire bonding: An enabling technology for heterogeneous multi-chip integration

Recent Advances in Monolithic Integration of Diverse Technologies with Si CMOS

Photonic-integrated circuits and components using quantum well intermixing

Photonic Integrated Circuits and Components Using Quantum Well Intermixing

Optical Investigations of Directly Wafer-Bonded InP–GaAs Heterojunctions

Wafer bonding technology and its applications in optoelectronic devices and materials

Quantum Well Intermixing For The Realization Of Photonic Integrated Circuits

Enabling Ultra-Thin Die to Wafer Hybrid Bonding for Future Heterogeneous Integrated Systems

A review of silicon-based wafer bonding processes, an approach to realize the monolithic integration of Si-CMOS and III–V-on-Si wafers

Heterogeneous Integration by Collective Die-To-Wafer Bonding

Photonic integrated circuits fabricated using quantum well intermixing

Research Toward Wafer-Scale 3D Integration of InP Membrane Photonics With InP Electronics

Photonic wire bonding: a novel concept for chip-scale interconnects.

On-chip hybrid integration of swept frequency distributed-feedback laser with silicon photonic circuits using photonic wire bonding

Hybrid integration of silicon photonics circuits and InP lasers by photonic wire bonding

Heterogeneous integration of single InAs/InP quantum dots with the SOI chip using direct bonding

Quantum-Well Intermixing For Optoelectronic Integration Using High-Energy Ion-Implantation

Multi-material heterogeneous integration on a 3-D Photonic-CMOS platform

Heterogeneously integrated MIR silicon photonics