Reinforcement of polyamide 6 with carbon fiber surface modified by a polar cross-linked network interfacial phase
Chengjun Xiao,Shan Liu,Yongji Gong,Yufei Liu,Yufei Liu,Min He,Jie Yu,Jie Yu,Chengjun Xiao,Shan Liu,Yongji Gong,Yufei Liu,Min He,Jie Yu
DOI: https://doi.org/10.1016/j.jmrt.2023.03.018
IF: 6.267
2023-05-01
Journal of Materials Research and Technology
Abstract:Carbon fiber-reinforced polyamide 6 (CF/PA6) composite materials have low relative density, high specific strength, and high specific modulus. However, the surface of the CF is smooth and chemically inert, resulting in poor interfacial adhesion in CF/PA6 composites, thereby limiting its application range. Herein, an epoxy resin emulsifier with hydrophilic ends and lipophilic middle was synthesized. After sizing, the surface chemical activity and roughness of the CF were higher. The tensile strength of the prepared CF/PA6 composite material was increased by 38.6%, and the impact strength was increased by 26.4%. By testing the tensile strength and wettability of the CF, as well as the dynamic thermomechanical properties and rheological behavior of the CF/PA6 composites, the influence of the sizing agent on the properties of CF and the interfacial properties of CF/PA6 composites was evaluated, and its mechanism of action is discussed herein.
materials science, multidisciplinary,metallurgy & metallurgical engineering