Abstract:Fiber sizing is one of the most important components in manufacturing composites by affecting mechanical properties, including strength and stiffness. The sizing of manmade fibers offers many advantages, such as improving fiber/matrix adhesion and bonding properties, protecting fiber surfaces from damage during the processing and weaving stages, and enhancing the surface wettability of polymer matrices. In this work, the influence of fiber sizing levels on carbon fibers' (CFs) mechanical properties is reported at room temperature using single fiber tensile testing (Favimat+), single fiber pullout testing (SFPO), and interfacial elemental analysis by X-ray photoelectron spectroscopy (XPS). Standard modulus CFs (7 ± 0.2 μm in diameter) were sized using two commercially available Michelman sizing formulations. The average solid content for each sizing formulation was 26.3 ± 0.2% and 34.1 ± 0.2%, respectively. HEXION RIMR 135 with curing agent RIMH 137 was used as a model thermoset epoxy matrix during SFPO measurements. A predictive engineering fiber sizing methodology was also developed. Sizing amounts of 0.5, 1, and 2 wt.% on the fiber surface were achieved for both sizing formulations. For each fiber size level, 50 single-fiber tensile testing experiments and 20 single-fiber pull-out tests were conducted. The ultimate tensile strength (σult) of the carbon fibers and the interfacial shear strength (τapp) of the single fiber composite were analyzed. The sizing levels' effect on interfacial shear stress and the O/C (Oxygen/Carbon) surface composition ratio was investigated. Based on our experimental findings, an increase of 6% in fiber performance was recorded for ultimate tensile and interfacial shear strengths. As a result, generalized fiber sizing and characterization methods were established. These developed methods can be used to characterize the strength and interfacial shear strength of manmade fibers with different sizing formulations and solid contents irrespective of the matrix, i.e., thermoset or thermoplastic.

Effect of Sizing Agent on the Surface of Carbon Fiber and Interfacial Adhesion of Carbon Fiber/Vinyl Ester Resin Composite

Effect of the double bond content of sizing agents on the mechanical properties of carbon fibre reinforced vinyl ester composites

Effect of the interplay between fiber surface chemistry and sizing reactivity on fiber matrix interaction in carbon fiber reinforced epoxy resin

Surface Characteristics of Different Cross-Section Carbon Fibers and Its Effect on Interfacial Adhesion Properties of Composite

Effect of Sizing Agents on Surface Properties of Carbon Fibers and Interfacial Adhesion of Carbon Fiber/Bismaleimide Composites

Effect of sizing agents on tensile properties of carbon fiber filament wound structures

The Effect of Sizing Agent of Carbon Fibre on the Interface of Electron Beam Cured Composites

Mechanism of the impact of the sizing agent chain length on the interfacial mechanical properties of carbon/epoxy composites

Effect of sizing on the interfacial shear strength of carbon fiber/epoxy resin monofilament composite

Surface and Wettability Property Analysis of CCF300 Carbon Fibers with Different Sizing or Without Sizing

Improving the interfacial property of carbon fiber/vinyl ester resin composite by grafting modification of sizing agent on carbon fiber surface

Effect of polyetherimide sizing on surface properties of carbon fiber and interfacial strength of carbon fiber/polyetheretherketone composites

Glass fiber/epoxy composites with improved interfacial adhesion by using cross‐linking sizing agent

Improve the interfacial properties of carbon fiber reinforced epoxy resin composites by maleimide‐modified waterborne polyurethane sizing agent

The influence of sizing treatment on the mechanical and morphological properties of carbon fiber reinforced polyphenylene sulfide composites

Investigation of sizing materials for carbon fiber reinforced thermoplastic composites

Waterborne epoxy sizing agent with hyperbranched structure to improve the interface performance of carbon fiber

Adjusting the pH of sizing agents to achieve superior interfacial and mechanical properties of carbon fiber reinforced epoxy composites.

Effect of Fiber Sizing Levels on the Mechanical Properties of Carbon Fiber-Reinforced Thermoset Composites

Effect of Molecular Weight of Self-Emulsifying Amphiphilic Epoxy Sizing Emulsions on the Carbon Fibres and Interfacial Properties of Their Composites

A Water-Soluble Thermoplastic Polyamide Acid Sizing Agents for Enhancing Interfacial Properties of Carbon Fibre Reinforced Polyimide Composites