Abstract:In order to establish an accurate integrity assessment of structures containing defects at high temperature, it is necessary to clarify the constraint effect on creep crack growth (CCG) property. However, the effect of the out-of-plane creep constraint induced by the specimen thicknesses has been little studied. In this study, the CCG properties and fracture mechanism of Cr-Mo-V type steel at 566°C were investigated by using the compact tension specimens with different thicknesses. The results show that the data of the CCG rate da/dt versus C* lie within a relatively tight scatter band on log-log scale for the specimens with different thicknesses at higher values of C*. In addition, the differences of CCG rate becomes large with C* decreasing. It means that the effect of out-of-plane constraint on CCG rate is dependent on the load level (C*). The reason for the similar CCG rate is that the creep damage and fracture mechanism of void growth at grain boundary ahead of crack tips in the specimens with different thicknesses does not essentially change. The size rc of the creep damage and fracture process zone in front of crack tips is related to the specimen thickness, and the damage rate fields over the process zone are similar for the specimens with different thicknesses. The deformation near the crack tip obscures the constraint effect. Based on a reference stress field under plane strain state and the creep process zone rc, in-plane and out-of-plane constraint parameter Rd and Td were defined and the creep crack-tip constraint effect induced by specimen thickness were quantitatively examined. The factors of creep time and load level (C*) influencing the constraint effect were analyzed.

Dai, Yanwei and Liu, Yinghua and Chen, Haofeng (2016) Influences of T- stress on constraint effect in mismatched modified boundary layer model for creep crack. In: ASME 2016 Pressure Vessels and Piping

Influences of T-Stress on Constraint Effect in Mismatched Modified Boundary Layer Model for Creep Crack

Mismatch Constraint Effect of Creep Crack With Modified Boundary Layer Model

Mismatch Constraint Effect for Bimaterial Interfacial Creep Crack

Numerical Investigations on the Effects of T-Stress in Mode I Creep Crack

Numerical Investigations on the Effects of T-stress in Creep Crack

Characterization of Mismatch Constraint Effect for the Central Crack Plate under Biaxial Loading

The Interacting Effect for Collinear Cracks Near Mismatching Bimaterial Interface under Elastic Creep

Influences of material mismatch on interface crack tip field in three layered creeping materials

Constraint Effects on Creep Crack Growth

Characteristics and Implications of Material Mismatch on Mode II Creep Crack Tip Field: Theoretical Analysis and Numerical Investigation

Mismatch Effect on the Mode II Type Crack Tip Field in Power-Law Creeping Materials

Effect of the Out-Of-Plane Constraint on Creep Crack Growth Property of Cr-Mo-V Type Steel

Assessment of Creep Behavior Using a Damage-Coupled Model for Martensitic Stainless Steel

Creep Behaviors Calculated by Varying Material Constants Obtained from Different Stress Regions for a Closed-End P91 Pipe

Effects of nonproportional loading and residual stress on creep crack tip fields

Constraint modified time dependent failure assessment diagram (TDFAD) based on <i>C</i>(<i>t</i>)-<i>A</i><sub>2</sub>(<i>t</i>) theory for creep crack

Effects of Stress Level and Stress State on Creep Ductility: Evaluation of Different Models

Effect of constraint on creep fracture toughness of a Cr-Mo-V steel

Experimental Investigation Of In-Plane Constraint And Out-Of-Plane Constraint Effects On Creep Crack Growth

Prediction of creep crack initiation in Cr–Mo–V steel specimens with different geometries