Abstract:Journal of Composite Materials, Ahead of Print. In this study, a three-dimensional random representative volume element model was constructed using the finite element method combined with Python script to investigate the residual stress distribution in SiCp/Al composites with varying volume fractions, particle shapes, and particle size under thermal cycling conditions. The model has two different particle morphologies: spheres and irregular polygons. The results show that the irregular polygonal SiC particles exhibit higher residual stresses than spherical particles before and after thermal cycling due to their complex load transfer pathways and higher stress concentration at particle corners, which makes them more consistent with the characterization of SiCp/Al composites under practical application conditions. As the volume fraction of SiC particles increases, the particle spacing decreases, hindering the release of thermal stresses through plastic deformation. Notably, the relief rate of residual stress reached 53% in the 12 vol% SiCp/Al composites, with the stress decreasing from 698 MPa to 328 MPa after 50 thermal cycles. In contrast, the reduction rate for 18 vol% composites is only 13% after thermal cycling. Furthermore, compared to larger particles (7.3 μm, 8.9 μm), the smaller particles (4.3 μm, 5.9 μm) exhibit a more uniform stress distribution and lower thermal stresses before and after thermal cycling. Consequently, our work provides a significant theoretical basis for the design and application of SiCp/Al composites, especially for the application of materials under extreme temperature changes.

A GENERAL APPROACH TO THE MEASUREMENT OF THERMAL RESIDUAL STRAINS AND STRESSES IN SiCw/Al COMPOSITES

Roles of orientation relationship and recrystallization in superplasticity of SiCw/6061Al composite

Residual stress variation in SiCf/SiC composite during heat treatment and its effects on mechanical behavior

Thermal residual stress in continuous SiC fiber reinforced titanium matrix composites

The Effect of Residual Stress on Whisker Reinforcements in SiCw-Al2O3 Composites During Cooling

Influence of Reinforcement with Multimodal Distribution on Thermophysical Properties and Fracture Behavior in Al-Si/SiC Composites Infiltrated under Super-Gravity Field

Investigating the Effects and Mechanisms of Thermal–Vibration-Coupled Stress Relief Treatment on Residual Stress in SiC/Al Composites

Effect of thermal residual stress on the tensile properties and damage process of C/SiC composites at high temperatures

Study of the residual stress distribution in SiCp/Al composites under thermal cycling conditions

Revealing the mechanism of internal stress on dimensional stability in SiC/Al composites under long-term thermal exposure

A Study of the Residual Stress and Its Influence on Tensile Behaviors of Fiber-Reinforced Sic/Al Composite

Experimental study of residual stress distribution in interfacial micro-region of SiC f /Ti17 composites via micro-slotting method

Wear Behaviour and Microstructural Changes of SiCw-Al Composite under Unlubricated Sliding Friction

Thermal Residual Stresses in SiC Particle Reinforced Aluminium Composites: a Study by the Taylor-based Nonlocal Theory of Plasticity

Residual stress analysis in the Al2O3/Ti 3SiC2 multilayer composites

Origins and characterization techniques of stress in SiC crystals: A review

Effects of interfacial residual stress on mechanical behavior of SiCf/SiC composites

Quantitative determination of the stability of SiC whisker in reaction-bonded/hot-pressed Si3N4 composites by X-ray diffraction

Direct Measurement of Residual Stresses and Their Effects on the Microstructure and Mechanical Properties of Heat-Treated Si3N4 Ceramics

Thermal mismatch strain induced disorder of Y 2 Mo 3 O 12 and its effect on thermal expansion of Y 2 Mo 3 O 12 /Al composites.

Effect of strain rate on the tensile properties of mini-SiC/SiC composites