Abstract:The coefficient of thermal expansion (CTE) of concrete is a property that can affect the performance of the pavement and its service life and is one of the most important inputs in the Mechanistic-Empirical Pavement Design Guide (MEPDG). The CTE can be either estimated or measured in the laboratory. The test method used to determine this property is AASHTO TP 60, still a provisional test method and not yet evaluated for its precision. CTEs of more than 1,800 concrete specimens were measured at the Turner-Fairbank Highway Research Center. The specimens included cylinders that were cast in the laboratory as well as field cores obtained from the Long-Term Pavement Performance pavement sections. Approximately 150 of the specimens were tested individually several times for assessment of repeatability of the test method. An analysis is presented of test differences observed, as is a sensitivity analysis of the CTE test variability on predicted performance based on the MEPDG. The differences in predicted international roughness index (IRI), percent slabs cracked, and faulting due to test variability were determined for concretes with CTEs ranging from 4 to 7 × 10 −6 in./in./°F. It was observed that differences in test results may result in significant discrepancies in the predicted IRI, percent slabs cracked, and faulting. Thus, a single test result should not be used as representative of the CTE of a mixture due to the considerable impact of the test variability on the predicted pavement performance. Moreover, the specifications should state the minimum number of tests necessary for the CTE determination and the acceptable test variability.

Influence Of Concrete Componenets On Coeddicient Of Thermal Expansion

Effect of Fly Ash and Slag Powder on Coefficient of Thermal Expansion of Concrete

Temperature-Dependent Coefficient of Thermal Expansion of Concrete in Freezing Process

Effect of fly ash on thermal expansion coefficient of concrete

Influence of Mineral Admixtures and Air-Entraining Agent on Thermal Expansion Property of Cement-Based Materials

Effect of Mix Proportion on Coefficient of Thermal Expansion of Concrete

Effect of components of cement paste on thermal deformation characteristics

Prediction of Concrete Coefficient of Thermal Expansion by Effective Self-Consistent Method Considering Coarse Aggregate Shape

Experimental research on thermal deformation of hardened cement paste

Effecting Coefficients for Concrete Structure Durability Design Index

INFLUENCE OF AGGREGATE SIZE ON THERMAL EXPANSION PROPERTY OF CONCRETE

Change of the Coefficient of Thermal Expansion of Mortar Due to Damage by Freeze Thaw Cycles

An Experimental Study Of Thermal Expansion Coefficient Of Concrete

Thermal Expansion Prediction of Cement Concrete Based on a 3D Micromechanical Model Considering Interfacial Transition Zone

Experimental study on the capillary absorption of cement-based materials and analysis of influencing factors

Predicting concrete coefficient of thermal expansion with an improved micromechanical model

Effect of Coefficient of Thermal Expansion Test Variability on Concrete Pavement Performance as Predicted by Mechanistic-Empirical Pavement Design Guide

Micromechanical Model for Predicting Coefficient of Thermal Expansion of Concrete

Effect of porosity on thermal expansion coefficient of cement pastes and mortars

Effect of Different Volume Fraction of Steel Fiber/graphite on Thermal Conductivity and Compressive Properties of Concrete

Effect of Volume Fraction of Coarse Aggregate on Elastic Modulus and Compressive Strength of Concrete