Abstract:An adiabatic temperature rise (ATR) test was used to determine the degree of cement hydration in concrete. In the experiments, emphasis was placed on the influences of water to cementitious material ratio (w/b) and aggregate content on the ATR and the development of degree of cement hydration. A total of nine concrete mixtures with three w/b ratios (0·30, 0·43, 0·62) and three aggregate contents (50%, 60%, 70% by volume) were used in the tests. The experimental results show that, for a given aggregate content, the lower the w/b ratio, the higher the temperature rise. For a given w/b ratio, the higher the aggregate content, the lower the temperature rise. The effects of temperature and age on the hydration process of cement may be taken into consideration by the equivalent age concept. For the same equivalent age, the degree of cement hydration is a function of w/b ratio only, regardless of the aggregate content. The advance of degree of cement hydration with equivalent age can be described as an initially slow developing stage, followed by a fast increasing stage and then a nearly steady-state stage. With an increase in w/b ratio, both the length of the initial stage and the ultimate degree of cement hydration at steady state increase. The higher the w/b, the longer the equivalent age needed to achieve the steady state. In addition, a model for predicting concrete elastic modulus and compressive strength, based on the degree of cement hydration in which the effect of environmental drying can be taken into account, was developed; good agreement was found between the test and model results. The model may be used for the prediction of mechanical properties of precast concrete under different curing conditions.

Predicting concrete coefficient of thermal expansion with an improved micromechanical model

A Novel Strength Model for Cement Marine Clay Based on the Mechanical-Chemical Coupling Behavior

Temperature-Dependent Coefficient of Thermal Expansion of Concrete in Freezing Process

Prediction of Effective Chloride Diffusivity of Cement Paste and Mortar from Microstructural Features

Efficient Numerical Model for Effective Thermal Conductivity of Concrete with Aggregates of Different Morphologies and Imperfect Interfaces

A new method for predicting compressive strength of cement-based materials

Prediction of thermal expansion coefficient of fiber-reinforced cement concrete based on micromechanics method

Numerical Method for Predicting Young's Modulus of Concrete with Aggregate Shape Effect

Experimental and Theoretical Prediction Model Research on Concrete Elastic Modulus Influenced by Aggregate Gradation and Porosity

A Multi-Phase Model for Predicting the Effective Diffusion Coefficient of Chlorides in Concrete

Simple Three-Step Analytical Scheme for Prediction of Elastic Moduli of Hardened Cement Paste

A novel multi-scale model for predicting the thermal damage of hybrid fiber-reinforced concrete

A nano-model for micromechanics-based elasticity prediction of hardened cement paste

Two-Dimensional Microstructure-Based Model for Evaluating the Permeability Coefficient of Heterogeneous Construction Materials

Mathematical modeling of cement hydration process and microstructure development

Model for Hydration Heat of Cement in Concrete and Its Application

A Numerical Method for the Chloride Diffusivity in Concrete with Aggregate Shape Effect

A Micromechanical Investigation of Cement Paste Through a Combination of the X-ray Computed Tomography and the Phase Field Method

Cement Hydration Based Model to Predict the Mechanical Properties of Precast Concrete

A Mathematical Model for the Electrical Resistivity of Cement Paste at Early Ages Considering the Partially Saturated State

Multiscale Thermoelastic Analysis of the Thermal Expansion Coefficient and of Microscopic Thermal Stresses of Mature Concrete