Abstract:An electromechanically-coupled micro-contact resistance measurement system is built to mimic the contact process during fatigue testing of nanoscale-thickness interconnects using multiple probe methods. The design combines an optical microscope, high-resolution electronic balance, and micromanipulator-controlled electric probe, and is coupled with electrical measurements to investigate microscale contact physics. Experimental measurements are performed to characterize the contact resistance response of the gold nanocrystalline pad of a 35-nm-thick interconnect under mechanical force applied by a tungsten electrode probe. Location of a stable region for the contact resistance and the critical contact force provides better understanding of micro-contact behavior relative to the effects of the contact force and the nature of the contact surface. Increasing contact temperature leads to reduced contact resistance, softens the pad material, and modifies the contact surface. The stability of both contact resistance and interconnect resistance is studied under increasing contact force. Major fluctuations emerge when the contact force is less than the critical contact force, which shows that temporal contact resistance will affect interconnect resistance measurement accuracy, even when using the four-wire method. This performance is demonstrated experimentally by heating the Au line locally with a laser beam. Finally, the contact resistances are calculated using the LET (Li–Etsion–Talke) model together with combined Holm and Sharvin theory under various contact forces. Good agreement between the results is obtained. This research provides a way to measure change in interconnect line resistance directly under a stable contact resistance regime with a two-wire method that will greatly reduce the experimental costs.

Acts-p 00075 effect of contact resistances on thermal and electrical characterization of metallic nanowires

Fringing Field Effects on Electrical Resistivity of Semiconductor Nanowire-Metal Contacts

Thermal Characterization of Microscale Conductive and Nonconductive Wires Using Transient Electrothermal Technique

Electrical and Thermal Transport through Silver Nanowires and Their Contacts: Effects of Elastic Stiffening

Electrothermal Characterization of Single-Walled Carbon Nanotube (SWCNT) Interconnect Arrays

Temperature dependence of electrical and thermal conduction in single silver nanowire

Experimental Study on Nanosized Contact Point

Effective Lorenz Number of the Point Contact Between Silver Nanowires

Measurement Methods and Applications for Thermophysical Properties at Micro/Nanoscales

J012015 Electrical Properties of Individual Aluminum Nanowire Generated by Stress-Induced Method

Characterization of Micro-Contact Resistance Between A Gold Nanocrystalline Line and A Tungsten Electrode Probe in Interconnect Fatigue Testing

Thermal Conductivities of Metallic Nanowires with Considering Surface and Grain Boundary Scattering

Characterization of Thermal Transport Across Single-Point Contact Between Micro-Wires

Thermal Characterization of Micro/nanoscale Conductive and Non-Conductive Wires Based on Optical Heating and Electrical Thermal Sensing

Investigation on Nanotube-Metal Contacts under Different Contact Types

Contact Thermal Resistance Between Silver Nanowires With Poly(Vinylpyrrolidone) Interlayers

Measurement of the intrinsic thermal conductivity of a multiwalled carbon nanotube and its contact thermal resistance with the substrate

Characterization of Thermal Diffusivity of Micro/nanoscale Wires by Transient Photo-Electro-thermal Technique

A three-probe method for accurate nanoscale thermal transport measurements

Electrical Transport Measurements of the Side-Contacts and Embedded-End-contacts of Platinum Leads on the Same Single-Walled Carbon Nanotube

Nanoscale electromechanics to measure thermal conductivity, expansion and interfacial losses