Abstract:This study explores flame structures and combustion dynamics in high-pressure n-dodecane fuel sprays, focusing on the formation and consumption of formaldehyde (CH 2 O) during autoignition and the development of poly-aromatic hydrocarbons (PAH) as soot precursors. These processes are crucial for optimizing combustion efficiency and reducing emissions. However, traditional approaches, which rely on single-shot measurements or ensemble-averaged visualizations, often overlook critical early-stage processes during low-temperature ignition. To overcome these challenges, we employed an innovative high-speed planar laser-induced fluorescence (PLIF) technique at 50 kHz using a pulse-burst Nd:YAG laser system with an excitation wavelength of 355 nm. This approach, applied for the first time to Engine Combustion Network (ECN) Spray D flames, provides unprecedented insights into the combustion processes at varying ambient temperatures and oxygen concentrations. Additionally, simultaneous high-speed schlieren imaging at 100 kHz was used to visualize spray penetration, first-stage ignition, and thermal expansion zones. Our findings reveal that, similar to Spray A flames, CH 2 O forms in cold, fuel-rich zones well upstream of the combustion zone. However, in Spray D flames, the schlieren signal softening observed in the jet's head does not lead to complete disappearance, and the CH 2 O signal is absent from the full head of the spray. During the second-stage ignition, CH 2 O consumption accelerates due to high-temperature reactions, leading to a significant reduction in its signal. Unlike the mushroom-shaped structure seen in Spray A flames, Spray D flames exhibit a quasi-steady PAH phase structure, with lean peripheral mixtures insufficient for soot precursor formation. Notably, reducing ambient oxygen concentration to 13 % while maintaining or increasing temperature prolongs the presence of CH 2 O, highlighting its influence on ignition dynamics and oxidation processes in dodecane spray flames. This study provides new insights into the combustion mechanisms of high-pressure sprays and offers valuable data for developing next-generation combustion technologies, including models, aimed at improving efficiency and reducing emissions.

Single-shot Two-Dimensional Measurement of Nanoparticles in Turbulent Jet-Diffusion Flames Using Phase-Selective Laser-Induced Breakdown Spectroscopy

A new diagnostic for volume fraction measurement of metal-oxide nanoparticles in flames using phase-selective laser-induced breakdown spectroscopy

Visualization of Multi-Regime Turbulent Combustion in Swirl-Stabilized Lean Premixed Flames

In-situ Laser Diagnostic of Nanoparticle Formation and Transport Behavior in Flame Aerosol Deposition

Simultaneous Single-Shot Two-Dimensional Imaging of Nanoparticles and Radicals in Turbulent Reactive Flows

Novel Low-Intensity Phase-Selective Laser-Induced Breakdown Spectroscopy of TiO2 Nanoparticle Aerosols During Flame Synthesis

Measurement and Numerical Simulation of Ultrafine Particle Size Distribution in the Early Stage of High-Sodium Lignite Combustion

In Situ Laser Diagnostics of Nanoparticle Transport Across Stagnation Plane in a Counterflow Flame

Phase-selective Laser–induced Breakdown Spectroscopy in Flame Spray Pyrolysis for Iron Oxide Nanoparticle Synthesis

Doping mechanism of Vanadia/Titania nanoparticles in flame synthesis by a novel optical spectroscopy technique

Single droplet combustion of precursor/solvent solutions for nanoparticle production: Optical diagnostics on single isolated burning droplets with micro-explosions

Two-dimensional Imaging of Gas-to-particle Transition in Flames by Laser-Induced Nanoplasmas

Phase-selective laser-induced breakdown spectroscopy of metal-oxide nanoparticle aerosols with secondary resonant excitation during flame synthesis

Phase-Selective LIBS Diagnostics of Flame Spray Pyrolysis of Titania-based Nanoparticles

Ultra-high-speed PLIF imaging for simultaneous visualization of multiple species in turbulent flames

Single-pulse real-time billion-frames-per-second planar imaging of ultrafast nanoparticle-laser dynamics and temperature in flames

High-speed, three-dimensional tomographic laser-induced incandescence imaging of soot volume fraction in turbulent flames

Laser-Based Investigation of the Transition from Droplets to Nanoparticles in Flame-Assisted Spray Synthesis of Functional Nanoparticles

High spatiotemporal resolution optical measurements of two-stage ignition and combustion in Engine Combustion Network Spray D flames

Dynamic Behavior of Sodium Release from Pulverized Coal Combustion by Phase-Selective Laser-Induced Breakdown Spectroscopy

Observation of Incipient Particle Formation During Flame Synthesis by Tandem Differential Mobility Analysis-Mass Spectrometry (DMA-MS)