Abstract:We have developed in this work a method of elemental analysis of powdered materials with laser-induced breakdown spectroscopy (LIBS). This method requires simple sample preparation. Powders are first mixed into a 75cSt base oil to obtain a paste which is then smeared onto the polished surface of a solid state substrate, aluminum plate for instance, in the form of a uniform thin film. The prepared sample is ablated by a high energy infrared (IR at 1064nm) nanosecond laser pulse. The laser beam transmits through the coating layer of the material to be analyzed and induces a strong plasma from the substrate. The initial plasma interacts in turn with the coating layer, leading to the vaporization and excitation of the incorporated powder particles. The subsequent emission from the plasma includes emission lines of the elements contained in the powder, which is preferentially captured by a suitable detection system. The analysis of the recorded spectrum allows the concentration determination of the targeted elements in the powder. We first applied the method on a cellulose powder of 20μm typical particle size. The powder was spiked with titanium dioxide (TiO2) nanoparticles for Ti concentrations ranging from 25ppm to 5000ppm by weight. Calibration graphs were thus built to deduce figures-of-merit parameters such as the coefficient of determination (R2) and the limits of detection and quantification (LoD and LoQ). We optimized especially the choice of reference line for spectrum normalization, which resulted in better analytical performances. In the second step, two sets of powders, the aforementioned cellulose powder and an alumina powder with average particle size of ≤10μm, were spiked with TiO2 nanoparticles. We then assessed the matrix effect between these two different powders for the determination of Ti by comparing their calibration curves. Our results show universal calibration curve in Ti determination in the two tested matrices. The results are further compared to the case where the powders were prepared in pellet.

A new diagnostic for volume fraction measurement of metal-oxide nanoparticles in flames using phase-selective laser-induced breakdown spectroscopy

Novel Low-Intensity Phase-Selective Laser-Induced Breakdown Spectroscopy of TiO2 Nanoparticle Aerosols During Flame Synthesis

In-situ Laser Diagnostic of Nanoparticle Formation and Transport Behavior in Flame Aerosol Deposition

Single-shot Two-Dimensional Measurement of Nanoparticles in Turbulent Jet-Diffusion Flames Using Phase-Selective Laser-Induced Breakdown Spectroscopy

Phase-selective laser-induced breakdown spectroscopy of metal-oxide nanoparticle aerosols with secondary resonant excitation during flame synthesis

Phase-Selective LIBS Diagnostics of Flame Spray Pyrolysis of Titania-based Nanoparticles

In Situ Laser Diagnostics of Nanoparticle Transport Across Stagnation Plane in a Counterflow Flame

Doping mechanism of Vanadia/Titania nanoparticles in flame synthesis by a novel optical spectroscopy technique

Phase-selective Laser–induced Breakdown Spectroscopy in Flame Spray Pyrolysis for Iron Oxide Nanoparticle Synthesis

Laser-Based Investigation of the Transition from Droplets to Nanoparticles in Flame-Assisted Spray Synthesis of Functional Nanoparticles

Flame Synthesis of Carbon and Metal-Oxide Nanoparticles: Flame Types, Effects of Combustion Parameters on Properties and Measurement Methods

Simultaneous Single-Shot Two-Dimensional Imaging of Nanoparticles and Radicals in Turbulent Reactive Flows

Single droplet combustion of precursor/solvent solutions for nanoparticle production: Optical diagnostics on single isolated burning droplets with micro-explosions

Tuning Excitation Laser Wavelength for Secondary Resonance in Low-Intensity Phase-Selective Laser-Induced Breakdown Spectroscopy for In-Situ Analytical Measurement of Nanoaerosols

Two-dimensional Imaging of Gas-to-particle Transition in Flames by Laser-Induced Nanoplasmas

Numerical Simulation of Nanoparticle Synthesis in Diffusion Flame Reactor

Effect of Precursor Loading on Non-Spherical TiO2 Nanoparticle Synthesis in a Diffusion Flame Reactor

Quantitative elemental detection of size-segregated particles using laser-induced breakdown spectroscopy

Elemental Analysis of Powders with Surface-Assisted Thin Film Laser-Induced Breakdown Spectroscopy

Simultaneous In-Situ Measurement of Soot Volume Fraction, H2O Concentration, and Temperature in an Ethylene/Air Premixed Flame Using Tunable Diode Laser Absorption Spectroscopy

In-situ light extinction nano-oxide volume fraction measurements during single iron particle combustion