Abstract:This study explores flame structures and combustion dynamics in high-pressure n-dodecane fuel sprays, focusing on the formation and consumption of formaldehyde (CH 2 O) during autoignition and the development of poly-aromatic hydrocarbons (PAH) as soot precursors. These processes are crucial for optimizing combustion efficiency and reducing emissions. However, traditional approaches, which rely on single-shot measurements or ensemble-averaged visualizations, often overlook critical early-stage processes during low-temperature ignition. To overcome these challenges, we employed an innovative high-speed planar laser-induced fluorescence (PLIF) technique at 50 kHz using a pulse-burst Nd:YAG laser system with an excitation wavelength of 355 nm. This approach, applied for the first time to Engine Combustion Network (ECN) Spray D flames, provides unprecedented insights into the combustion processes at varying ambient temperatures and oxygen concentrations. Additionally, simultaneous high-speed schlieren imaging at 100 kHz was used to visualize spray penetration, first-stage ignition, and thermal expansion zones. Our findings reveal that, similar to Spray A flames, CH 2 O forms in cold, fuel-rich zones well upstream of the combustion zone. However, in Spray D flames, the schlieren signal softening observed in the jet's head does not lead to complete disappearance, and the CH 2 O signal is absent from the full head of the spray. During the second-stage ignition, CH 2 O consumption accelerates due to high-temperature reactions, leading to a significant reduction in its signal. Unlike the mushroom-shaped structure seen in Spray A flames, Spray D flames exhibit a quasi-steady PAH phase structure, with lean peripheral mixtures insufficient for soot precursor formation. Notably, reducing ambient oxygen concentration to 13 % while maintaining or increasing temperature prolongs the presence of CH 2 O, highlighting its influence on ignition dynamics and oxidation processes in dodecane spray flames. This study provides new insights into the combustion mechanisms of high-pressure sprays and offers valuable data for developing next-generation combustion technologies, including models, aimed at improving efficiency and reducing emissions.

Observation of Incipient Particle Formation During Flame Synthesis by Tandem Differential Mobility Analysis-Mass Spectrometry (DMA-MS)

Ultrafine Particle Formation in Pulverized Coal, Biomass, and Waste Combustion: Understanding the Relationship with Flame Synthesis Process

Assessment of Physical Soot Inception Model in Normal and Inverse Laminar Diffusion Flames

Flame Synthesis of Carbon and Metal-Oxide Nanoparticles: Flame Types, Effects of Combustion Parameters on Properties and Measurement Methods

The Initial Stages of Multicomponent Particle Formation During the Gas Phase Combustion Synthesis of Mixed SiO2/TiO2

Effect of Precursor Loading on Non-Spherical TiO2 Nanoparticle Synthesis in a Diffusion Flame Reactor

Single droplet combustion of precursor/solvent solutions for nanoparticle production: Optical diagnostics on single isolated burning droplets with micro-explosions

Synthesis of Nanoparticles in a Flame Aerosol Reactor with Independent and Strict Control of Their Size, Crystal Phase and Morphology

The High Charge Fraction of Flame-Generated Particles in the Size Range below 3 Nm Measured by Enhanced Particle Detectors

Flame Aerosol Synthesis of Nanostructured Materials and Functional Devices: Processing, Modeling, and Diagnostics

Nanostructure and Reactivity of Nascent Carbon Particles from 2,5-Dimethylfuran/n-heptane Swirling Inverse Diffusion Flames

Numerical Simulation of Nanoparticle Synthesis in Diffusion Flame Reactor

Cluster Formation Mechanisms of Titanium Dioxide During Combustion Synthesis: Observation with an APi-TOF

Laser-Based Investigation of the Transition from Droplets to Nanoparticles in Flame-Assisted Spray Synthesis of Functional Nanoparticles

In Situ Determination of Droplet and Nanoparticle Size Distributions in Spray Flame Synthesis by Wide-Angle Light Scattering (WALS)

Progress on Flame Aerosol Synthesis of Nanomaterials

Flame synthesis of nanoparticles based on high flux electrostatic atomization burner

3D Trajectory, Morphology and Phase Discrimination of Burning Al/AP Propellant Particles with Time-Resolved Astigmatic Dual-Beam Interferometric Particle Imaging

High spatiotemporal resolution optical measurements of two-stage ignition and combustion in Engine Combustion Network Spray D flames

Mobility Size and Mass of Nascent Soot Particles in a Benchmark Premixed Ethylene Flame

Single-shot Two-Dimensional Measurement of Nanoparticles in Turbulent Jet-Diffusion Flames Using Phase-Selective Laser-Induced Breakdown Spectroscopy