Abstract:Pyrolysis technology is one of the most effective thermal treatment methods recycling rigid polyurethane foam (RPUF) waste. To optimize pyrolysis recovery efficiency, quantifying the pyrolysis reaction kinetics and the heat required for the thermal treatment process is critical. This work focuses on establishing a systematic methodology to quantify pyrolysis reaction kinetics and thermodynamics for RPUF waste. RPUF waste with two different densities (RPUF ρ100 and RPUF ρ45 ) were investigated using thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) under anaerobic atmosphere to measure mass and heat flow information. The obtained data were inversely analyzed using a numerical framework known as ThermaKin2Ds. Pyrolysis reaction mechanisms with four and three consecutive first-order reactions were developed to reproduce the TGA data for RPUF ρ100 and RPUF ρ45 , respectively. The Hill Climbing Optimization Algorithm was employed to adjust the reaction kinetics for an improved agreement between the ThermaKin2Ds-reproduced and experimental data. Based on the heat flow data from DSC tests, the specific heat capacity of each condensed-phase component was determined by using the inverse modeling method. Additionally, the micro-scale combustion calorimeter was used to generate the heat release data that served as the target data for inversely determining the heats of complete combustion, h c , of each pyrolyzate. The established pyrolysis reaction models was further validated by predicting the TGA results collected under different external heating conditions. Subsequently, the generated combustion-inhibiting gases (CO 2 ) and combustion-promoting gases (olefins, alkanes, carboxylic acids, etc.) were characterized through TGA coupled with Fourier-transform infrared spectroscopy (TG-FTIR). This allowed us to elucidate the gas-phase combustion phenomena observed in MCC experiments. This work provides a core set of parameters for optimizing the thermal treatment conditions of RPUF waste.

Analysis of polyethylene pyrolysis using a bench scale fixed bed

Multiscale Modeling of Plastic Pyrolysis with a Neural Network-Inspired Pyrolysis Kinetic Model and Coarse-Grained DEM-CFD

Analysis on low-temperature polyethylene pyrolysis and gasification in different atmospheres

Simulating Polyethylene Pyrolysis from a Generalized Molecular-Level Kinetic Model

Characteristics of Pyrolyzing Polyethylene in a Horizontal Plasma Jet Reactor

Investigating Kinetic Behavior and Reaction Mechanism on Autothermal Pyrolysis of Polyethylene Plastic

Kinetics, Product Evolution, and Mechanism for the Pyrolysis of Typical Plastic Waste

A Molecular-Level Kinetic Model for the Primary and Secondary Reactions of Polypropylene Pyrolysis

Investigation of pyrolysis of waste plastics in a rotary kiln - influence of final pyrolysis temperature on pyrolysis products

Kinetic studies on the pyrolysis of plastic waste using a combination of model-fitting and model-free methods

Characterization of pyrolysis behavior for rigid polyurethane foam wastes with different densities through TGA-FTIR-DSC-MCC and Hill Climbing Optimization methods

Numerical investigation on the heat transfer of plastic waste pyrolysis in a rotary furnace

Pyrolysis kinetics analysis of the organic waste sorted from food waste

Study on fluidized-bed pyrolysis of waste paper

Fluidized Bed Gasification of PE Plastic in Municipal Solid Waste

Comparative Study on the Synergistic Co-Pyrolysis of Plastics and Rubber Waste: Thermal Behavior and Product Distributions

Study on the pyrolysis behaviors of mixed waste plastics

Fast pyrolysis of biomass and waste plastic in a fluidized bed reactor

Analysis of liquid products and mechanism of thermal/catalytic pyrolysis of HDPE

Development of a Comprehensive Theoretical and Experimental Methodology for Evaluating the Parameters of Recycling by the Pyrolysis of Plastic Based on Polycarbonate and Polyethylene

Thermo-chemical analysis and modeling of combustion of waste pyrolysis gaseous products