Abstract:The increasing demand for lightweight materials with exceptional stability and durability has resulted in a significant rise in fiber-reinforced plastic (FRP) production. These materials find applications in various fields. However, the exceptional properties and diverse compositional range of FRPs pose challenges to conventional recycling strategies. Pyrolysis has emerged as a highly promising approach for separating the fibers from the polymer matrix. In this study, we employed thermal analysis coupled with high-resolution mass spectrometry to investigate the pyrolysis process. Representative FRP showed a starting decomposition temperature of 300 °C and bisphenol A, styrene, alkenes, and phenols could be identified. The identified parameters were used to operate a pilot plant with a capacity of up to 50 kg/h FRP, and reactor products were directly analyzed with soft photoionization mass spectrometry. The findings demonstrated good agreement between the pilot plant results and laboratory experiments, particularly for smaller compounds (m/z<200). The non-condensable fraction showed a range of 17 to 22 MJ/m3 as lower heating value. Analysis of the recovered fibers (diameter between 6.20 and 8.05 μm) revealed residual coke, but no toxic fibers were detected, according to the World Health Organization's definition. Yet, the organic coating of the fibers contained small amounts of potentially harmful PAHs. A toxicological assessment using a multicellular in vitro model confirmed the low hazardous potential of the recovered fibers. The findings contribute to developing sustainable and environmentally friendly recycling strategies for FRP while addressing important aspects related to the safety and toxicological implications of the resulting chemicals and fibers.

Development of a Comprehensive Theoretical and Experimental Methodology for Evaluating the Parameters of Recycling by the Pyrolysis of Plastic Based on Polycarbonate and Polyethylene

Feedstock recycling from plastic and thermoset fractions of used computers (I): pyrolysis

Thermal and spectroscopic (TG/DSC–FTIR) characterization of mixed plastics for materials and energy recovery under pyrolytic conditions

Investigating Kinetic Behavior and Reaction Mechanism on Autothermal Pyrolysis of Polyethylene Plastic

Determination of the Thermodynamic Parameters of the Pyrolysis Process of Post-Consumption Thermoplastics by Non-Isothermal Thermogravimetric Analysis

Investigation on the Synergistic Effect Between Different Components in Pyrolysis of Paper-Plastic Composite Material

Isoconversional Analysis of the Catalytic Pyrolysis of ABS, HIPS, PC and Their Blends with PP and PVC

Pyrolysis of Mixed Plastic Waste: I. Kinetic Study

Comparative Analysis of Fuels Derived from PE Plastic Waste with a Mixture of Plastic Recycling Waste of Codes: 1, 2, 4, 5, 6 and 7 Based on Low-Temperature Pyrolysis

Analysis of polyethylene pyrolysis using a bench scale fixed bed

Kinetic Analysis of Thermal Degradation of Recycled Polypropylene and Polystyrene Mixtures Using Regenerated Catalyst from Fluidized Catalytic Cracking Process (FCC)

Kinetics, Product Evolution, and Mechanism for the Pyrolysis of Typical Plastic Waste

Thermogravimetric study on thermal degradation kinetics and polymer interactions in mixed thermoplastics

Kinetic and Thermodynamic Analysis of Thermal Decomposition of Waste Virgin PE and Waste Recycled PE

Pyrolysis Processing of Polymer Waste Components of Electronic Products

Kinetic studies on the pyrolysis of plastic waste using a combination of model-fitting and model-free methods

Comparative Study on the Synergistic Co-Pyrolysis of Plastics and Rubber Waste: Thermal Behavior and Product Distributions

Pyrolysis and combustion characterisation of HDPE/APP composites via molecular dynamics and CFD simulations

Thermal degradation of typical plastics under high heating rate conditions by TG-FTIR: Pyrolysis behaviors and kinetic analysis

Study of the Viscosity and Thermal Characteristics of Polyolefins/Solvent Mixtures: Applications for Plastic Pyrolysis

Recycling of fiber reinforced composites: Online mass spectrometric tracing, offline physicochemical speciation and toxicological evaluation of a pilot plant pyrolytic conversion