Abstract:The gas-solid flow in a three-dimensional slot-rectangular spouted bed is numerically investigated under the parallel framework of the computational fluid dynamics-discrete element method coupling approach. The fluid phase is solved with the k-epsilon turbulence model at the computational grid level, while the solid phase is tracked individually with the discrete element method at the particle scale. Millions of particles are calculated using a total number of 112 CPUs in a cluster. The predicted pressure drop profiles and the minimum spouting velocities of the calculations under different bed heights agree well with the experimental data. The startup procedure and the solid flow pattern are identified. Then, wall effects on the distribution properties of the gas-solid hydrodynamics are explored. Moreover, the interaction between spout and annulus and the effects of the superficial velocity and bed height on the bed hydrodynamics are discussed. The results show that a larger pressure drop appears in the system with a higher bed height. A bubble with its shape influenced by the slot geometry is formed in the startup procedure. Moreover, the bed hydrodynamics show a strong 3-D behavior along the depth direction. Large vertical solid flux mainly concentrates in the central region of the spout. The spout-annulus interface is dramatically influenced by the slot shape and shows different evolutionary tendencies in the different directions, and this influence becomes weaker along the bed height. The larger the superficial velocity is, the higher the bed height and the larger the spouting height appear. Besides, solid flow patterns under different bed heights with the superficial velocity the same ratio to the corresponding minimum spouting velocity show a similar behavior.

Hydrodynamics of a Spouted Bed with Draft Tube

Discrete Element Simulation of the Hydrodynamics in A 3d Spouted Bed: Influence of Tube Configuration

Influence of Short-Draft Tube on Fluid Dynamics in Bubble Column with CFD

Hydrodynamics and Heat Transfer in a Fluidized Bed with Liquid Spray: Particle Color-Change Based Measurement and Modelling

Numerical Simulation of Two-Dimensional Spouted Bed with Draft Plates by Discrete Element Method

Effects of Draft Tubes on Particle Velocity Profiles in Spouted Beds

Spout geometry of fine particle conical spouted beds equipped with internal devices

Investigation of pressure drop in a cocurrent downflow three-phase moving bed

Hydrodynamic Behavior of a Three‐Phase Spouted Bed with Very Large Particles

Particle dispersion and circulation patterns in a 3D spouted bed with or without draft tube

Numerical Investigation of the Gas‐Solid Flow Characteristics in a Three‐Dimensional Spouted Bed with a Draft Tube

Experimental Investigation on Gas-Solid Hydrodynamics of Coarse Particles in A Two-Dimensional Spouted Bed

Influences of operating parameters on the hydrodynamics of a 3-D spout–fluid bed based on DEM modeling approach

Flow patterns of solids in a two-dimensional spouted bed with draft plates: PIV measurement and DEM simulations

Three-Dimensional Modeling of Gas–Solid Motion in a Slot-Rectangular Spouted Bed with the Parallel Framework of the Computational Fluid Dynamics–Discrete Element Method Coupling Approach

Effect of Operating Parameters on Gas‐Solid Hydrodynamics and Heat Transfer in a Spouted Bed

Hydrodynamic Behavior of an Internally Circulating Fluidized Bed with Tubular Gas Distributors

Effect of Bed Thickness on a Pseudo 2D Gas-Solid Fluidized Bed Turbulent Flow Structures and Dynamics

Modeling of dense particle flow in the annulus of spouted beds with draft tube

Particle-scale Simulation of Fluidized Bed with Immersed Tubes

Numerical Study of a Lab-Scale Double Slot-Rectangular Spouted Bed with the Parallel CFD–DEM Coupling Approach