Abstract:The accidental thermal abuse of single lithium ion cells via overheating is a common cause of thermal runaway (TR). Moreover, the occurrence of TR in any single cell of a battery module composed of multiple cells can lead to catastrophic damage via TR propagation (TRP) through the module. However, few studies have evaluated the primary characteristics of thermally-induced TR and TRP in actual battery modules experimentally under open-air environments. The present study addresses this issue by establishing the temperature, smoke propagation, and combustion characteristics of enclosed pouch battery modules composed of 12 LiNi0.8Co0.1Mn0.1O2 cathode and graphite anode cells operating in a 4 parallel, 3 series configuration during the TRP process based on three parallel experiments conducted in an open-air environment with a heating plate applied to the first cell of the module to trigger TR, and temperature sensors positioned along the sequence of cells. Analysis of the TR process arising in the first cell demonstrates that an intense flame tends to be produced at the cathode because TR is initiated at the cathode. The fact that TR occurs within an enclosed module shell produces reductive gases attacking the anode, which limits the flame at the anode to a relatively small size, with a high proportion of dense smoke that flows more slowly than smoke flow at the cathode. The TR process then dramatically propagates, induces intense combustion at both the positive and negative electrode locations, and produces a maximum temperature of 1370 degrees C in the central region of the module. However, TR does not propagate uniformly in sequence from cell 1 to cell 12 within the module, but rather propagates in reverse from cell 6 to cell 5 in the middle of the module. This arises due to the influence of the flow of high-temperature smoke within the battery module enclosure during TR. Analysis of the combustion properties of the modules and the velocity profiles of flame jets demonstrate that the TRP process observed under the conditions of this study represent a high-temperature fire comprised of high-speed flame jets, which would exacerbate the propagation of TR between the adjacent cells of the battery module, and ultimately lead to extensive fire damage for the entire module or even the entire vehicle.

Thermal Runaway Propagation Within Module Consists of Large Format Li-Ion Cells

A 3D Thermal Runaway Propagation Model for a Large Format Lithium Ion Battery Module

Characterization of Penetration Induced Thermal Runaway Propagation Process Within a Large Format Lithium Ion Battery Module

A 3D simulation model of thermal runaway in Li-ion batteries coupled particles ejection and jet flow

Thermal Runaway Propagation Model for Designing A Safer Battery Pack with 25 Ah Linixcoymnzo2 Large Format Lithium Ion Battery

An Experimental and Analytical Study of Thermal Runaway Propagation in a Large Format Lithium Ion Battery Module with NCM Pouch-Cells in Parallel

Experimental Study on Thermal Runaway Propagation of Lithium-Ion Battery Modules with Different Parallel-Series Hybrid Connections

Thermal Runaway Propagation Analytics and Crosstalk in Lithium‐Ion Battery Modules

Thermal Runaway Propagation and Combustion Characteristics of Enclosed LiNi0.8Co0.1Mn0.1O2 Pouch Battery Modules in an Open Environment

Experimental Study on the Thermal Runaway and Its Propagation of a Lithium-Ion Traction Battery with NCM Cathode under Thermal Abuse

Experimental Investigation on the Thermal Runaway and Its Propagation in the Large Format Battery Module with Li(Ni1/3Co1/3Mn1/3)O-2 As Cathode

Experimentally exploring prevention of thermal runaway propagation of large-format prismatic lithium-ion battery module

Experimental Study on Module-to-Module Thermal Runaway-Propagation in a Battery Pack

Mitigation strategy for Li-ion battery module thermal runaway propagation triggered by overcharging

Thermal Runaway Front Propagation Characteristics, Modeling and Judging Criteria for Multi-Jelly Roll Prismatic Lithium-Ion Battery Applications

Modelling of Thermal Runaway Propagation in Lithium-Ion Battery Pack Using Reduced-Order Model

Experimental investigation on thermal runaway propagation in the lithium ion battery modules under charging condition

Modeling the Propagation of Internal Thermal Runaway in Lithium-Ion Battery

Thermal runaway propagation characteristics and preventing strategies under dynamic thermal transfer conditions for lithium-ion battery modules

Thermal runaway propagation behavior and energy flow distribution analysis of 280 Ah LiFePO4 battery

Experimental investigation on thermal runaway propagation of large format lithium ion battery modules with two cathodes