Abstract:Lithium-ion batteries, containing flammable electrolytes, have become safer in many ways since their invention. As the technology matures, energy and power densities increase: the European Council for Automotive R&D set 2030 (cell level) targets for battery electric vehicle energy density of 1000 Wh L -1 , with 450 Wh kg -1 specific energy and 1800 W kg -1 peak specific power. This rise in energy and power densities increases the risk of accidental release of energy from the batteries and thermal runaway (TR). Safety is thus a key concern when designing a lithium-ion battery system for electric vehicles (EV). TR relates to fast heating of a battery cell caused by exothermic chemical decomposition reactions of the materials inside the cells. It develops in a cell when heat is generated and cannot be dissipated quickly enough to the surroundings, giving rise to an abrupt (exponential) temperature increase and subsequent reaction rate increase. During TR, various exothermic side reactions can occur, leading to temperature increase, accompanied by pressure increase as electrolyte evaporates and venting. This can result in the emission of highly flammable gas and the formation of toxic atmosphere, as well as, in fire and, in very rare circumstances, in explosion. The corresponding temperature increase in adjacent cells (or modules) might then be sufficient to cause them to also go into TR – leading to a process known as thermal runaway propagation (TRP). Fit-for purpose testing procedures to assess the risks associated with TRP are therefore of utmost importance and the focus should always be the safety of the EV occupants, bystanders, first responders and property. Some tests in current standards and regulations try to simulate internally driven failures (e.g. internal short circuit), but whether these tests are suitable to represent field failures remains an open question. This work will give an insight into two selected TR initiation methods assessed within JRC's TR initiation and propagation test campaigns, namely (a) localised rapid external heating, as developed and patented internationally by NRC (National Research Council Canada) and (b) ceramic nail penetration, as described in the IEC TR 62660-4 standard. It examines the response of short-stacks of pouch cells extracted from automotive batteries after TR is triggered in a single cell. Experimental data and analysis to better understand how TR propagates and the potential for TRP inhibition will be reported. The potential of inhibiting TRP is explored on 2- and 5-cell assemblies with a multi-layer, porous, composite insulation material between cells. Separating the cells can delay significantly TRP in adjacent cells in modules constructed with pouch cells, whereas TRP may be slowed and even inhibited as the thickness of the multilayer material varies.

Thermal Runaway Propagation and Combustion Characteristics of Enclosed LiNi0.8Co0.1Mn0.1O2 Pouch Battery Modules in an Open Environment

Experimental Study on the Thermal Runaway and Its Propagation of a Lithium-Ion Traction Battery with NCM Cathode under Thermal Abuse

Experimental and Modeling Analysis of Thermal Runaway for LiNi0.5Mn0.3Co0.2O2/Graphite Pouch Cell Triggered by Surface Heating

Analysis of Thermal Runaway in Pouch-Type Lithium-Ion Batteries Using Particle Image Velocimetry

Characterization of Penetration Induced Thermal Runaway Propagation Process Within a Large Format Lithium Ion Battery Module

Experimental investigation on thermal runaway propagation of large format lithium ion battery modules with two cathodes

Thermal Runaway Propagation Within Module Consists of Large Format Li-Ion Cells

Experimental Investigation of Thermal Runaway Characteristics of Large-Format Li(Ni0.8Co0.1Mn0.1)O2 Battery under Different Heating Powers and Areas

A systematic investigation of thermal runaway characteristics, inflame evolution and post-mortem analysis caused by overcharging for lithium-ion batteries with different cathode materials

Experimental and Modeling Analysis of Thermal Runaway Propagation over the Large Format Energy Storage Battery Module with Li4Ti5O12 Anode

Study on Thermal Runaway Behavior of Li-Ion Batteries Using Different Abuse Methods

Mitigation strategy for Li-ion battery module thermal runaway propagation triggered by overcharging

Experimental Investigation on the Venting Gas of Cell-to-pack Lithium-Ion Battery Module During Thermal Runaway

Experimental Study on Thermal Runaway Propagation of Lithium-Ion Battery Modules with Different Parallel-Series Hybrid Connections

(Digital Presentation) Thermal Runaway Initiation, Propagation and the Potential for Propagation Inhibition in Commercial Automotive Lithium-Ion Cells and Modules

Thermal Runaway Propagation Analytics and Crosstalk in Lithium‐Ion Battery Modules

Investigation of thermal runaway propagation characteristics of lithium-ion battery modules under different trigger modes

Inhibition Effect of Different Interstitial Materials on Thermal Runaway Propagation in the Cylindrical Lithium-Ion Battery Module

Experimental Investigation on the Thermal Runaway and Its Propagation in the Large Format Battery Module with Li(Ni1/3Co1/3Mn1/3)O-2 As Cathode

Experimental Investigation of the Thermal Runaway Propagation Characteristics and Thermal Failure Prediction Parameters of Six-Cell Lithium-Ion Battery Modules

Experimental Study on Module-to-Module Thermal Runaway-Propagation in a Battery Pack