Abstract:Graphene-encased copper particles (GE@Cu) with fluctuating particle sizes ranging from 3 to 15 nm, 80-210 nm, 270-530 nm, and 1.2–3.5 μm are prepared by metal-organic chemical vapor deposition using cupric tartrate and cupric acetylacetonate as precursors.The reaction temperature has been found a significant effect on the decomposition of the organocopper compounds, the coalescence of Cu/C clusters, and the morphology evolution of GE@Cu particles. Thus, the size of copper particles and thickness of the graphene cladding layer (few-layer and multi-layer) can be strictly controlled by modulating the pyrolysis temperatures of the organocopper compounds. The optimized GE@Cu particles with 0.5 wt% mass ratio in lubricants exhibit the reduction of wear track depths and coefficient of friction comparing with the pure lubricants. The corresponding wear rate for the 0.5 wt% few-layer graphene@Cu (FLGE@Cu) and 0.5 wt% multi-layer graphene@Cu (MLGE@Cu) decreases by 60.3 % and 62.5 %, respectively. Additionally, Raman spectroscopy illustrates the formation of a self-lubricating graphene layer on the wearing surface during the friction with GE@Cu as the lubricant additives. The hybridized structure of this nanoadditive introduces synergistic lubrication effects, involving sliding friction (graphene) and rolling friction (copper particles) at the friction contact surface, leading to enhanced lubrication performance. The comprehensive encapsulation of copper particles by GE established the suitability of this lubricant additive for enduring prolonged and intricate environments. In conclusion, GE@Cu lubricant additives hold great promise across the fields of mechanical equipment, bearings, and engines.

CuS Nanoparticle Additives for Enhanced Ester Lubricant Performance

Electric Response of CuS Nanoparticle Lubricant Additives: The Effect of Crystalline and Amorphous Octadecylamine Surfactant Capping Layers.

Preparation and Tribological Properties of Surface-Capped Copper Nanoparticle as a Water-Based Lubricant Additive

Preparation and Tribological Properties of Copper Nanoparticles As Lubricant Additive

Effect of lubricant additives of Cu, Fe and bimetallic CuFe nanoparticles on tribological properties

Insights into the Tribological Properties and Electrical Conductivity of Cu–C Coating Under Grease Lubrication

Preparation,Characterization of Oil-soluble Copper Nanoparticles and the Tribological Property as Additive in SF15W/40 Lubricating Oil

In situ preparation of Cu-Mo-S nanoparticle additive with multi-functional tribological properties

Hydrothermal synthesis of copper zirconium phosphate hydrate [Cu(OH)2Zr(HPO4)2·2H2O] and an investigation of its lubrication properties in grease.

Synergistic effect of in-situ synthetic GE@Cu particles as additives for enhancement in lubrication performances

Potential-Controlled Boundary Lubrication Using MoS2 Additives in Diethyl Succinate

Tribological Properties of Metallic Nanoparticles As Lubricant Additives under the Applied Electric Currents

Fabrication of two-dimensional MXene nanosheets loading Cu nanoparticles as lubricant additives for friction and wear reduction

High Temperature Tribological Performance of Steel/Copper Friction Pairs Lubricated with a Modified C-WS2-(Fe3O4 + TiN) Nanoadditives in Non-Copper Coated Solid Wires

Development of Cu-15Ni-8Sn/MoS 2 self-lubricating composites with desirable mechanical and friction properties

Nanosized Copper Powders Prepared by Gel-Casting Method and Their Application in Lubricating Oil

Ionic Liquid-Functionalized ZnO Nanomaterial: Multifunctional Additives Enhancing Tribological Performance and Corrosion Resistance in Ester Oil

Study on the Tribological Performance of Copper-Based Powder Metallurgical Friction Materials with Cu-Coated or Uncoated Graphite Particles as Lubricants

Tribological performance of various metal-doped carbon dots as water-based lubricant additives and their potential application as additives of poly(ethylene glycol)

Study on Lubrication and Friction Reduction Properties of ZIF-8 Nanoparticles as Si3N4 Ceramic Water Lubrication Additives

Combined Effect of Phosphonium Ionic Liquid and Copper Oxide Nanopowder as Additives to the Bio-based Lubricant During Tribological Analysis