Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. Wear of rolling elements can produce a huge impact on the mechanical properties of screw-nut joint, and is one of primary causes resulting in the accuracy degradation or even failure of kinematic pairs. Many mechanical models have been constructed to investigate the vibration performance of rolling elements. But the wear influence is considered scarcely because of the complicacy of loading status and wear process. In this study, a novel wear prediction model can be proposed for screw-nut joint to overcome the above difficulty. An ultimate stiffness model can be constructed on basis of the wear model. The influences of running distance, external forces, preload, and structural parameters on wear performance are researched. A dynamic model of screw-nut joint with varying stiffness is constructed to carry out a detailed study on its vibration performance, particularly taking into account the coupling effect between wear and vibration. The influences of wear on the axial stiffness and vibration characteristics are studied based on the proposed model. Moreover, the change rules of axial stiffness and dynamic response under variable preloads are researched. The results indicate that the choice of parameters can produce an appreciable impact on the wear rate. The wear can result in the losses of stiffness and critical displacement of screw-nut joint. Although increasing the preload can improve the stiffness and the critical displacement, it also aggravates the wear degree. When the relative displacement between nut and screw is greater than the critical displacement, the balls with preload and axial force in opposite directions will be out of action, and the monotonic property of stiffness will also change. Due to the monotonicity of stiffness is not consistent before and after the critical displacement point, the amplitude-frequency curve presents a jumping phenomenon.

Interference preload anti-rotation validity criterion for cylinder assemblies under vibration environment

Contact parameters evolution of bolted joint interface under transversal random vibrations

Numerical Simulation of the Assembly Process of Bolted Flange Joints Used in Rotating Machinery

Flexible assembly research for cylindrical interference fit with form error in shaft-hole structures

Study on Compensatory Magnitude of Axial Misalignment for Flexible Couplings Assembled by Interference Fit

EXPERIMENTAL STUDY ON A VIBRATION ISOLATION SYSTEM WITH VISCOUS DAMPING AND CUBIC NONLINEAR DISPLACEMENT

Three-dimensional contact surface modeling and stress analysis of interference fit based on cylindricity error

CONTACT PRE-TIGHTENING EFFECT OF NONLINEAR ELASTIC MATERIAL ON A CYLINDRICAL STRUCTURE OF MULTI-LAYERS

A Visco-hyperelastic Constitutive Model for Rubber Considering the Strain Level and One Case Study in the Sealing Packer

Discrete Differential Geometry Modeling on the Fully Coupled Vibration of the Viscoelastic Rod Interacting with Rigid Cylinders

Parameter Study of Friction Damping Ring for Railway Wheels Based on Modal Analysis

A Model for Static Contact of Revolute Cylinder Based on Geometric Constraint and Elastic Half-Space Theory

Method of accumulation of preload loss of bolted joints due to rotational self-loosening caused by cyclic, transversal excitation

Model and nonlinear dynamic characteristics analysis of screw-nut joint considering coupling effect of wear and vibration

A Comparative Study and Stiffness Analysis of Angular Contact Ball Bearings under Different Preload Mechanisms

Load-Compression Relationship of Incompressible Circular Rubber Pad Bonded between Rigid Plates

Research on Spatial Developable Mechanism Considering Revolute Clearance Joints with Irregular Rough Surfaces

Reliability modeling of pre-stressed composite structures subject to interlayer slip failure under multi-axial random impact and vibration loads

Assembly Variation Analysis of Incompletely Positioned Macpherson Suspension Systems Considering Vehicle Load Change

Non-circular Interference Fit Analysis in Harmonic Reducer Based on Sequential Assembling and Loading Simulation

A Stiffness Model for Bolted Joints Considering Asperity Interactions of Rough Surface Contact