Abstract:In order to study the physical mechanism of the effect of complex fusion irradiation environment on Zr-based amorphous alloys, simultaneous irradiation with Fe and He ions was performed on Zr63.5Cu23Al9Fe4.5 amorphous and crystalline alloys at room temperature. Single Fe ions irradiation and single He ions irradiation were used for comparison to investigate the influence of synergistic effects as well as intrinsic structural differences on irradiation-induced microstructural evolution and mechanical properties. It was been found that the irradiated amorphous alloys maintained its amorphous structure without nanocrystallization or elemental segregation. However, the irradiated region of the crystalline alloys experienced full amorphization, forming amorphous structure with bright contrast (Al-rich) and dark contrast (Cu-rich or Fe-rich). Under single He ions irradiation and simultaneous Fe+He ions irradiation conditions, He bubbles generated in both amorphous and crystalline alloys, where He bubbles in amorphous alloys distributed homogeneously, while the Cu-rich region of crystalline alloys exhibited larger sizes of He bubbles. Compared to single He ions irradiation, the size of He bubbles was larger, the atomic arrangement was more disordered (for amorphous alloys) and the element distribution was more homogeneous (for crystalline alloys) after simultaneous irradiation. Compared to single Fe ions irradiation, simultaneous irradiation induced slightly greater swelling. After irradiation, obvious softening was observed in both alloys, and the hardness of amorphous alloys was as follows: unirradiated > single He ions irradiation approximate to single Fe ions irradiation approximate to simultaneous Fe+He ions irradiation, while that of crystalline alloys was as follows: unirradiated > single He ions irradiation > single Fe ions irradiation approximate to simultaneous Fe+He ions irradiation. The serrated flow behavior of amorphous alloys weakened and the deformation was more homogeneous. As a result of irradiation-induced amorphization, serrated flow phenomenon also occurred in crystalline alloys, however, this type of inhomogeneous amorphous structure showed much weaker serrated flow behavior than the homogeneous amorphous structure. This study provides a deeper understanding of the irradiation damage mechanism of Zr-based amorphous alloys in complex irradiation environments.

Effect of Ion Irradiation Introduced by Focused Ion-Beam Milling on the Mechanical Behaviour of Sub-Micron-Sized Samples

In-Plane Liftout and Push-to-Pull for In Situ Mechanical Testing of Irradiated Inconel X-750

Artifact-free sample preparation of metal thin films using Xe plasma-focused ion beam milling for atomic resolution and in situ biasing analyses

Effects of Ion Irradiation on Structural and Mechanical Properties of Crystalline Fe/amorphous SiOC Nanolaminates

High-quality TEM specimen preparation for lithium-ion conducting solid electrolytes by low-energy ion milling

Surface Modification of Ni3al-Based Alloy Ic6 with Intense Pulsed Ion Beams

Influences of the Irradiation of Intense Pulsed Ion Beam (IPIB) on the Surface of Ni₃Al Base Alloy IC6

Coherent X-ray measurements of ion-implantation-induced lattice strains in nano-crystals

Study on thermal shock irradiation resistance of CoCrFeMnNi high entropy alloy by high intensity pulsed ion beam

Characterization of High Energy Xe Ion Irradiation Effects in Single Crystal Molybdenum with Depth-Resolved Synchrotron Microbeam Diffraction

Study on the Damage of Zr63.5Cu23Al9Fe4.5 Amorphous and Crystalline Alloys by Fe, He Ions Beam Irradiation

Effects of Single and Simultaneous Fe, He Ions Irradiations on CoCrFeMnNi High Entropy Alloy

Effect Of Irradiation With Intense Pulsed Ion Beams On The Phase Evolution Of Ni3al Based Superalloy Ic6

Study of curtaining effect reduction methods in Inconel 718 using a plasma focused ion beam

Ti and Its Alloys As Examples of Cryogenic Focused Ion Beam Milling of Environmentally-Sensitive Materials

Nanoindentation Experiment and Crystal Plasticity Study on the Mechanical Behavior of Fe-ion-irradiated A508-3 Steel

Study on the damage of Fe80B13Si7 alloy with different structure by high-intensity pulsed ion beam irradiation

Effects of Fe Concentration on the Ion-Irradiation Induced Defect Evolution and Hardening in Ni-Fe Solid Solution Alloys

Helium-hydrogen Synergistic Effects on Swelling in In-Situ Multiple-Ion Beams Irradiated Steels*

Evaluating the effects of pillar shape and gallium ion beam damage on the mechanical properties of single crystal aluminum nanopillars

Irradiation Effect of Intense Pulsed Ion Beam on (Tizrnbtacr)c