Abstract:High-volume-fraction SiC/Al (HVF-SiC/Al) composites have a wide range of applications in aerospace, optics, automotive and electronic packaging. However, because the hardness, brittleness and wear resistance increase with the increase in the volume fraction, it is difficult for traditional methods such as machining, to process HVF-SiC/Al composites to complex components. Therefore, in this paper, a novel method of the hybrid additive manufacturing is proposed to fabricate complex-structures SiC/Al composite parts. The effect of polymer infiltration and pyrolysis (PIP) on microstructure and properties of HVF-SiC/Al composites is investigated. The results show that the mechanical properties of the SiC preforms can be effctively enhanced by the PIP process, and this enhancement makes the SiC preforms meet the conditions for subsequent vacuum-pressure infiltration. The mechanical property of HVF-SiC/Al composites show a huge increase when in creasing the volume fraction of SiC. In particular, the flexural strength of HVF-SiC/Al composites increased from 202.28 MPa to 380.87 MPa, and the coefficient of thermal expansion (CTE) has also been reduced from 11.80 to 6.28 × 10 -6 /K, when the volume fraction of SiC increases from 42 to 80 vol%. For optimise the PIP process in the future, three theoretical models are used to predict the relationship between the CTE and the volume fraction of SiC. The results show that the experimental data are more consistent with the predicted values based on the Kerner's model, but deviate from the Rule-of-mixture (ROM) and Turner's models. Importantly, the complex-structures SiC/Al composite parts was successfully fabricated by this hybrid additive manufacturing.

SiCp/Al Composite Made by Electron Beam Rapid Manufacturing

Manufacturing Titanium Metal Matrix Composites by Consolidating Matrix Coated Fibres

Technology Research of Direct Metal Forming Based on Electron Beam

Effect of polymer infiltration and pyrolysis (PIP) on microstructure and properties of high volume fraction SiC/Al composites prepared by a novel hybrid additive manufacturing

Fabrication and characterization of SiC/Al composites prepared by laser powder bed fusion (LPBF) combined with vacuum pressure infiltration

Research progress of ceramic matrix composite parts based on additive manufacturing technology

Manufacturing of Continuous Carbon Fiber Reinforced Aluminum by Spark Plasma Sintering

Achieving ultrafine grain strengthening C f /SiC-GH3536 joints brazed with Cu-Ti-WC composite interlayer via cold spray additive manufacturing

Scalable manufacturing of the Al-based master composites containing TiB 2 and TiC particles and their modification effect on the hot cracking of rapidly solidified Al alloys

Manufacturing process of short carbon fiber reinforced Al matrix with preformless and their properties

Rapid Manufacturing Of Ceramic Parts

Preparation of low residual silicon content Si-SiC ceramics by binder jetting additive manufacturing and liquid silicon infiltration

Fabrication and characterization of carbon fiber reinforced SiC ceramic matrix composites based on 3D printing technology

Direct Metal Part Forming of 316L Stainless Steel Powder by Electron Beam Selective Melting

Production Technology Features for Aluminum Matrix Alloys with a Silicon Carbide Framework

Latest research progress of SiCp/Al composite for electronic packaging

Additive manufacturing of high mechanical strength continuous Cf/SiC composites using a 3D extrusion technique and polycarbosilane‐coated carbon fibers

Binder jetting additive manufacturing of hierarchical structural SiC w /SiC composites

Fabrication of high-strength Si/SiC composites with low shrinkage rates via vat photopolymerization technology and liquid silicon infiltration

Stereolithography-based additive manufacturing of lightweight and high-strength Cf/SiC ceramics

Sandwich-structured C/C-SiC Composites Fabricated by Electromagnetic-Coupling Chemical Vapor Infiltration