Abstract:Thermal sprayed NiCr-Cr3C2-CaF2/BaF2 composite coatings can be used as high-temperature wear-resistant material for aeroengine brush seal runway. High temperature friction and wear produces a coupling stress field formed by the superposition of thermal stress and friction stress. At the same time, the morphology and properties of each phase in the composite coating will have a significant impact on the coupling stress field. The thermal-mechanical coupling stress field simulation study of multiphase composite coatings under high temperature friction and wear conditions is still insufficient. The coupling stress distribution is simulated by finite element method to predict the potential failure mode of the coating and provide a basis for the design of brush sealing coating. Based on Voronoi polygon, the crystal micro finite element model of NiCr-Cr3C2-CaF2/BaF2 multiphase composite coating is established. The proportion, distribution morphology and thermal-mechanical parameters of each phase in the composite coating is simulated, and the von Mises stress and the first principal stress distribution under thermal-mechanical coupled conditions is obtained. The results show that the stress of the composite coating is significantly higher than that of the uniform coating, especially at the tip of the hard phase. Improving the morphology of the phase and passivating the acute angle can effectively alleviate the local intense stress. At the same time, the thermal-mechanical coupling stress field is closely related to the elastic modulus of bonded phase and hard phase. Mises stress and tensile stress of composite coating can be effectively controlled by adjusting the modulus of each phase. The thermal-mechanical coupling stress field simulation based on the microscopic finite element method provides a theoretical basis for the optimal design of multiphase composite coatings under high temperature friction and wear conditions.

Study on Contact Fatigue Crack Propagation Behavior of Cr7C3 Coatings

Performance in Resistance to Surface Fatigue for Cr 3 C 2 –25%NiCr Coatings by Plasma Spray and CDS Spray

Cr/CrN coating effect on the fatigue crack nucleation period of Ti-6Al-4V alloy

Stress-sensitive fatigue crack initiation mechanisms of coated titanium alloy

Comparative Study of Mechanical Performance of AlCrSiN Coating Deposited on WC-Co and cBN Hard Substrates

Study on Microstructure and Thermal Fatigue of FeMnCrAl/WC Coatings

Influence of Cr on the Surface Properties of the Micro-Textured WC+Co Alloy Coating

SEM and SEAM study on tribological performance of cermets coatings

Effects of Elastic Modulus Mismatch Between Coating and Substrate on the Friction and Wear Properties of TiN and TiAlN Coating Systems

Fretting fatigue crack initiation and propagation behaviours of Ti6Al4V alloy coated by functionally graded material

Structure, mechanical and tribological properties of thick CrNx coatings deposited by HiPIMS

Mechanical property and cracking mechanism of Cr-coated Zr alloy under tensile and compressive loading

Numerical Analysis of 3D Unilateral Quasi-static Contact: Effect of Coating Thickness and Mechanical Properties

Effect of electroless Ni-B and Ni-W-B coatings on the corrosion-fatigue behaviour of 7075 Al alloy

Considerations on the Failure Mechanisms at Fatigue Loading of 1018 Steel Samples Coated with Wip-C1 by Cold Spray

Comparative study on mechanical and tribological properties of Cr–Al–N and Cr–Al–O coatings deposited by cathodic arc evaporation

Simulation of High Temperature Friction Stress Field of Multiphase Composite Coating Based on Crystal Microscopic Finite Element Method

Influence of metallic Cr addition on the phase structure and mechanical properties of plasma-sprayed Ti–Si–C coatings

Low-cycle fatigue of MCrAlY-coated superalloys: a fracture mechanics-based analysis

Fatigue Failure Behavior of Aramid Fiber Reinforced Styrene Butadiene Rubber Composite with Different Fiber Coatings