Abstract:The length of hemp fibers in the rubber matrix under internal mixing/extrusion. Biomass renewable fiber has the advantages of low cost and environmental friendliness; however, its application as a reinforcement material is limited owing to its poor reinforcement effect. Thus, expanding its application is still a major challenge. This study investigates the effect of hemp fiber (HF) of different lengths on the mechanical properties and fatigue behavior of styrene‐butadiene rubber/carbon black (SBR/CB) compounds using high‐pressure low‐shear extrusion. The results showed that the length of the HF retained by the extrusion process was approximately 10 times that of the traditional internal mixing process (internal mixing and open mixing). Interface bonding between the long HF coated with butadiene‐vinyl pyridine latex (VPL) and the SBR/CB matrix was improved significantly. This inhibited the fatigue‐crack propagation and considerably improved the dynamic fatigue life of the notched specimens. The dynamic fatigue life of the notched specimens of the composite prepared by the extrusion process was approximately nine times longer than that of the traditional internal mixing process. The results showed that the long HF length retained after the extrusion process effectively enhanced the strength of the rubber composites and significantly improved the dynamic fatigue life of rubber products under alternating stress. Highlights The raw material, hemp fiber, is a renewable resource, low cost and environmentally friendly. Pioneering a new process for preparing rubber composite materials, replacing the traditional process for preparing composite materials. High‐pressure, low‐shear extrusion process retains the length of the hemp fibers and improves rubber composites properties. Compared to traditional processes,long fiber length is 10 times longer by the extrusion process and fatigue life is increased to 9 times. High‐pressure, low‐shear extrusion process enables mass production, opening up new ideas for rubber industrial production.

Fatigue Failure Behavior of Aramid Fiber Reinforced Styrene Butadiene Rubber Composite with Different Fiber Coatings

Viscoelastic Fracture Mechanics-Based Fatigue Life Model in Asphalt-Filler Composite System

Improvement of interfacial strength and fatigue stability of aramid fiber/rubber composites by constructing multiscale interphase structures

Compressive Fatigue Behavior of Gum and Filled SBR Vulcanizates

Effect of Physical and Chemical Crosslinking Structure on Fatigue Behavior of Styrene Butadiene Elastomer

Influence of aramid fibers modified by glycidyl polyhedral silsesquioxane assisted with supercritical carbon dioxide on the properties of aramid fiber‐reinforced styrene butadiene rubber composites

Enhanced fatigue resistance of plasma modified pyrolysis carbon black filled natural rubber composites

Fatigue performance of carbon fiber‐reinforced polymer strengthened single‐edge cracked steel plates: Effects of adhesive property and CFRP arrangement

Construction of an in situ interfacial layer for aramid fiber reinforced styrene butadiene rubber composites

Fatigue failure mechanism analysis and life prediction of short fiber reinforced polymer composites under tension-tension loading

Fatigue‐crack‐propagation behavior and mechanism of long hemp‐fiber‐enhanced styrene–butadiene rubber/carbon black compounds

Influence of Supercritical Carbon Dioxide-Assisted Polyamide Acid Modification of Aramid Fibers on the Properties of Aramid Fiber-Reinforced Styrene Butadiene Rubber

A Methodology to Predict the Fatigue Life under Multi-Axial Loading of Carbon Fiber-Reinforced Polymer Composites Considering Anisotropic Mechanical Behavior

Influences of fiber fibrillation degree on mechanical and tribological performances of aramid fiber/nitrile rubber composites

High-cycle random vibration fatigue behavior of CFRP composite thin plates

Static and fatigue behavior of basalt fiber-reinforced thermoplastic epoxy composites

Fatigue behavior of symmetric and asymmetric carbon and basalt fiber-reinforced polymer composites in transverse loading

Understanding friction and wear properties of carbon fiber/epoxy stitched composites

Dynamic Fatigue Behavior of Natural Rubber Reinforced with Nanoclay and Carbon Black

Fatigue behavior and modeling of short fiber reinforced polymer composites: A literature review

Fatigue behavior and damage analysis of PIP C/SiC composite