A Displacement Sensing Method Based on Permanent Magnet and Magnetic Flux Measurement
Jikai Zhang,Yicheng Shi,Yuewen Huang,Cheng Liang,Yantong Dong,Yihua Kang,Bo Feng
DOI: https://doi.org/10.3390/s22124326
IF: 3.9
2022-06-07
Sensors
Abstract:This paper proposes a displacement sensing method based on magnetic flux measurement. A bridge-structured magnetic circuit, formed by permanent magnets and two ferromagnetic cores, is designed and discussed. The analyses of the equivalent magnetic circuit and three-dimensional finite element simulations showed that the magnetic flux density changes linearly with the reciprocal of the sum of a constant and the displacement. A prototype sensor of the bridge structure is developed that consists of four permanent magnets as excitation, a Hall sensor as reception, and two ferromagnetic cores as the connection. Experiments have validated the feasibility of this method. The measured results show a good linearity between the sensor's output and the reciprocal of the sum of a constant and the displacement, with a correlation coefficient greater than 0.9995 across different measurement ranges. Additionally, the measured results significantly indicate that the proposed sensor is compatible with different ferromagnetic materials with a worst-case error of less than 5%. The proposed sensor has the advantages of low cost and good linearity; however, the test object is limited to ferromagnetic materials.
engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation