Abstract:The value of face contact pressure has an important influence on the wear life and leakage rate of the mechanical seal. For a long time, people have chosen face contact pressure based on experience and lack of theoretical support, which greatly reduces the effectiveness of the mechanical seal. Based on the percolation theory, the critical porosity of zero-leakage at the wetting and non-wetting sealing interface working in liquid medium is first discussed. The influence of end-face frictional heat on end-face friction and wear is then investigated. The design criteria for the face contact pressure of mechanical seals with zero-leakage and long-life operation are established. Afterwards, the face contact pressure range of the mechanical seal working in conventional different liquid medium is calculated, and the influence of different working conditions on the face contact pressure range change is analyzed. Existing studies have shown that mechanical seals can achieve zero-leakage and long-life operation. Under the rotating and stationary rings’ physical parameters and given working conditions, the face contact pressure range of the sealing medium water and propane propylene is 0.477~1.132 MPa. The diesel sealing medium has a larger face contact pressure range than that of water and propane propylene, which can reach 0.477~2.183 MPa. The working condition speed, medium temperature, and medium pressure have an influence on the face contact pressure range, while the influence of the working condition speed is the most significant.

Research of Forward Design Method of Contact Dynamic Seal

Experimental Study on Dynamic Sealing Performance under High Pressure and High Speed

Experimental Research and Finite Element Analysis of Seals in the Pressure Compensator

High-speed Abrasion Experimental Research of an Abradable Seal Rubber

Numerical Analysis and Improving Design of Car Door Weatherstrip Seal

Finite Element Analysis of Reciprocating Sealing Component of Radial Single-piston Pump

Optimization Design Of The Inner Radius Of The Sealing Surface Of Slipper

Study on evaluation index system of rubber materials for sealing

Investigation of Static and Dynamic Seal Performances of a Rubber O-Ring

The Theoretical Basis of Face Contact Pressure Design of the Zero-Leakage Mechanical Seal

Design and seal performance analysis of bionic sealing ring for dynamic seal

Experimental Investigations and Field Applications of Oil-Film-Lubricated Mechanical Face Seals with Spiral Grooves

Structural Design and Sealing Performance Analysis of Biomimetic Sealing Ring

Sealing Performance of Adaptive Contacting Mechanical Seal

Prediction of the Contact Behavior of Stepseals: Experimental and Numerical Investigations

Research Status and Development Trend of Cylindrical Gas Film Seals for Aeroengines

Research on No-Contact Hydraulic Dynamic Seal Characteristic Based on CFD

A Closed-Form Contact Model for Gas Face Seals During the Opened Operation

Efficiency-Reinforcement Design Study for Elastomeric Hydraulic Reciprocating Seal Based on Function Analysis

Research on Sealing Characteristics of Sealing System Utilizing Spring Energized Seal Ring

Design and Simulation of a New Near Zero-Wear Non-Contact Self-Impact Seal Based on the Tesla Valve Structure