Abstract:Elastohydrodynamic lubrication characteristics of hydraulic reciprocating seals have significant effects on sealing and tribology performances of hydraulic actuators, especially in high parameter hydraulic systems. Only elastic deformations of hydraulic reciprocating seals were discussed, and hydrodynamic effects were neglected in many studies. The physical process of the fluid-solid interaction effect did not be clearly presented in the existing fluid-solid interaction models for hydraulic reciprocating O-ring seals, and few of these models had been simultaneously validated through experiments. By exploring the physical process of the fluid-solid interaction effect of the hydraulic reciprocating O-ring seal, a numerical fluid-solid interaction model consisting of fluid lubrication, contact mechanics, asperity contact and elastic deformation analyses is constructed with an iterative procedure. With the SRV friction and wear tester, the experiments are performed to investigate the elastohydrodynamic lubrication characteristics of the O-ring seal. The regularity of the friction coefficient varying with the speed of reciprocating motion is obtained in the mixed lubrication condition. The experimental result is used to validate the fluid-solid interaction model. Based on the model, The elastohydrodynamic lubrication characteristics of the hydraulic reciprocating O-ring seal are presented respectively in the dry friction, mixed lubrication and full film lubrication conditions, including of the contact pressure, film thickness, friction coefficient, liquid film pressure and viscous shear stress in the sealing zone. The proposed numerical fluid-solid interaction model can be effectively used to analyze the operation characteristics of the hydraulic reciprocating O-ring seal, and can also be widely used to study other hydraulic reciprocating seals.

Efficiency-Reinforcement Design Study for Elastomeric Hydraulic Reciprocating Seal Based on Function Analysis

Investigation Into The Performance Of The Vl Seal Based On The 3d Model

Experimental Study on Dynamic Sealing Performance under High Pressure and High Speed

Experimental Research and Finite Element Analysis of Seals in the Pressure Compensator

Finite Element Analysis of Reciprocating Sealing Component of Radial Single-piston Pump

Numerical Analysis of the Traction Effect on Reciprocating Seals in the Hydraulic Actuator

Optimization design for mechanical seals in reactor coolant pumps based on a fluid-solid strong-interaction model

Fluid-solid Interaction Model for Hydraulic Reciprocating O-ring Seals

Investigation into the Influence of Stretching on Reciprocating Rod Seals Based on a Novel 3-D Model Vs Axisymmetric Model

Study on the Performance of Reciprocating Seals under the Coupling Effect of Elastohydrodynamic Lubrication and Rubber Wear

An Eccentric 3-D Fluid-Structure Interaction Model for Investigating the Effects of Rod Parallel Offset on Reciprocating-Seal Performance

Elastohydrodynamic lubrication simulation analysis and experimental verification of different tandem reciprocating rod seal systems

Mixed Lubrication Modeling of Multi-Lip Reciprocating Seals Based on Elastohydrodynamic Lubrication Theory

Effect of Swelling Behavior of Rubber Rings on the Sealing Performance for 70MPA Hydrogen Pressure Reducing Valves

Sealing performance assessments of PTFE rotary lip seals based on the elasto-hydrodynamic analysis with the modified archard wear model

Research of Forward Design Method of Contact Dynamic Seal

Analysis and Optimization of Structure Parameters of Hydrostatic Mechanical Seal

Simulation Study on the Effect of Eccentricity on the Performance of a Reciprocating Seal

Sealing performance and optimization design of squamous textured mechanical seal

Parametric Analysis of the Reciprocating Sealing Structure for Aircraft Actuator

Fluid-solid Strong-Interaction Model of Mechanical Seals in Reactor Coolant Pumps