Abstract:A simple and general Equivalent Dynamic Stiffness Mapping technique is proposed for identifying the parameters or the mathematical model of a nonlinear structural element with steady-state primary harmonic frequency response functions (FRFs). The Equivalent Dynamic Stiffness is defined as the complex ratio between the internal force and the displacement response of unknown element. Obtained with the test data of responses׳ frequencies and amplitudes, the real and imaginary part of Equivalent Dynamic Stiffness are plotted as discrete points in a three dimensional space over the displacement amplitude and the frequency, which are called the real and the imaginary Equivalent Dynamic Stiffness map, respectively. These points will form a repeatable surface as the Equivalent Dynamic stiffness is only a function of the corresponding data as derived in the paper. The mathematical model of the unknown element can then be obtained by surface-fitting these points with special functions selected by priori knowledge of the nonlinear type or with ordinary polynomials if the type of nonlinearity is not pre-known. An important merit of this technique is its capability of dealing with strong nonlinearities owning complicated frequency response behaviors such as jumps and breaks in resonance curves. In addition, this technique could also greatly simplify the test procedure. Besides there is no need to pre-identify the underlying linear parameters, the method uses the measured data of excitation forces and responses without requiring a strict control of the excitation force during the test. The proposed technique is demonstrated and validated with four classical single-degree-of-freedom (SDOF) numerical examples and one experimental example. An application of this technique for identification of nonlinearity from multiple-degree-of-freedom (MDOF) systems is also illustrated.

A principle of selecting points for identifying joint part parameters of a drum-disk structure based on frequency-response functions

Damping identification using weighted fitting of Frequency-response-function (WFF) method

Joint Dynamic Properties Identification with Partially Measured Frequency Response Function

A Joint Stiffness Identification Method Based on Finite Element Modeling and Frequency Response Functions

EMD Method on Identifying Natural Frequency and Damping Ratio of Vibration Mode

Estimation of Joint Parameters Using Frequency-Based Substructuring Techniques

Simulation and Experiment Study on System Identifications of Elastically Jointed Structures

Improved Method for Frequency-Domain Identifications of Structures

Joint Identification through Hybrid Models Improved by Correlations

An Integrated Joint Dynamics System for Elastically Jointed Structures

Equivalent Dynamic Stiffness Mapping Technique for Identifying Nonlinear Structural Elements from Frequency Response Functions

Coupling vibration characteristics of the shaft-disk-drum rotor system with bolted joints

Modelling and vibration evaluations of rotational mistuning-connecting disk-drum coupling structures with partial hard-coating damping treatment

Identification of Robot Joint Torsional Stiffness Based on the Amplitude of the Frequency Response of Asynchronous Data

Modal Parameter Discrimination of Structural Mode based on Vibration Test

Finite element modeling method of joint surfaces based on real surface pressure distribution

Response prediction for modified mechanical systems based on in-situ frequency response functions: Theoretical and numerical studies

Analytical model of bolted disk–drum joints and its application to dynamic analysis of jointed rotor

Model Parameter Identification of a Machining Robot Using Joint Frequency Response Functions

Coherence Analysis Method for Dynamic Force Identification

Modeling approach for flexible shaft-disk-drum rotor systems with elastic connections and supports