Abstract:A simple and general Equivalent Dynamic Stiffness Mapping technique is proposed for identifying the parameters or the mathematical model of a nonlinear structural element with steady-state primary harmonic frequency response functions (FRFs). The Equivalent Dynamic Stiffness is defined as the complex ratio between the internal force and the displacement response of unknown element. Obtained with the test data of responses׳ frequencies and amplitudes, the real and imaginary part of Equivalent Dynamic Stiffness are plotted as discrete points in a three dimensional space over the displacement amplitude and the frequency, which are called the real and the imaginary Equivalent Dynamic Stiffness map, respectively. These points will form a repeatable surface as the Equivalent Dynamic stiffness is only a function of the corresponding data as derived in the paper. The mathematical model of the unknown element can then be obtained by surface-fitting these points with special functions selected by priori knowledge of the nonlinear type or with ordinary polynomials if the type of nonlinearity is not pre-known. An important merit of this technique is its capability of dealing with strong nonlinearities owning complicated frequency response behaviors such as jumps and breaks in resonance curves. In addition, this technique could also greatly simplify the test procedure. Besides there is no need to pre-identify the underlying linear parameters, the method uses the measured data of excitation forces and responses without requiring a strict control of the excitation force during the test. The proposed technique is demonstrated and validated with four classical single-degree-of-freedom (SDOF) numerical examples and one experimental example. An application of this technique for identification of nonlinearity from multiple-degree-of-freedom (MDOF) systems is also illustrated.

Identification of Robot Joint Torsional Stiffness Based on the Amplitude of the Frequency Response of Asynchronous Data

On-line Frequency Response Method of Synchronous Machine Parameter Identification Based on Rotor Angle Measurement

Closed-Loop Dynamic Parameter Identification of Robot Manipulators Using Modified Fourier Series

Model Parameter Identification of a Machining Robot Using Joint Frequency Response Functions

Dynamic Identification of Industrial Robot Based on Nonlinear Friction Model and LS-SOS Algorithm

Dynamic Stiffness Identification of Adjustable Stiffness Joint Based on Decoupling and Linearization

Regularized automatic frequency response function acquisition of a milling robot operating in a high-dimensional workspace

Simulation and Experiment Study on System Identifications of Elastically Jointed Structures

Joint stiffness identification of industrial serial robots using 3D digital image correlation techniques

Variable Stiffness Identification and Configuration Optimization of Industrial Robots for Machining Tasks

Equivalent Dynamic Stiffness Mapping Technique for Identifying Nonlinear Structural Elements from Frequency Response Functions

Parameter identification for stiffness and damping of active magnetic bearing in flexible rotor system

Dynamic Identification for Robot Manipulators Based on Modified Fourier Series

An Improved Redundant Robotic Arm Parameter Identification Method

Dynamics Parameter Identification of Articulated Robot

Joint torque estimation method of industrial robot by combining error compensation model based on LSTM and iterative weighted parameter identification

A parameter identification method of horizontal robot arms

An industry-oriented digital twin model for predicting posture-dependent FRFs of industrial robots

Vibration Prediction of the Robotic Arm Based on Elastic Joint Dynamics Modeling

Operational Kinematic Parameter Identification of Industrial Robots Based on a Motion Capture System Through the Recurrence Way

Joint Dynamic Properties Identification with Partially Measured Frequency Response Function