Abstract:Generally, structural uncertainty of the robot dynamics system refers to model error caused by parameter identification, unstructured uncertainty is the unmodeled dynamic characteristic. No matter how elaborate modeling methods are used, there always be uncertainty. Therefore, this article applies deep learning for the first time to aid robot dynamic parameter identification of 6 degrees of freedom robot manipulator for compensation of uncertain factors. Firstly, the relatively accurate prediction of torque is obtained by the physical dynamic model using the parameters identification method (errors are less than 10% of the maximum torques). Secondly, we propose a novel deep neural network based approach called Uncertainty Compensation Model (UCM) to compensate the torque error introduced by the uncertainty. The UCM mainly composed by proposed Input Control Module (ICM) and Error Learning Models (ELMs) based on Long-Short-Term Memory and attention mechanism. The proposed ICM, which effectively avoids the unnecessary interference, is used to control valid input for ELMs. The ELMs, consisted by ELM units, concern extracting salient features from sequence data to predict the joint error. Also, this article summarizes the effects of valid input, timestep and attention mechanism on the performance of the UCM. Finally, the verification of parameter identification and torques compensation is carried out by a Universal Robot 5 manipulator. Compared with the prediction torques of physical dynamic model, the proposed UCM has a good ability to capture the friction characteristics and compensate for the error of local maximum torques, which effectively solves the deficiency of the physical dynamics model and improves prediction accuracy (errors are less than 6% of the maximum torques).

Joint torque estimation method of industrial robot by combining error compensation model based on LSTM and iterative weighted parameter identification

A Two-Stage Parameter Identification Method and Compensation Verification for Heavy Load Robot

Deep Learning Aided Dynamic Parameter Identification of 6-DOF Robot Manipulators

The Parameter Identification Model Considering Both Geometric Parameters and Joint Stiffness.

Dynamic Identification of Industrial Robot Based on Nonlinear Friction Model and LS-SOS Algorithm

Joint torque prediction of industrial robots based on PSO-LSTM deep learning

Joint Torque and Ground Reaction Force Estimation for a One-Legged Hopping Robot.

Dynamic Model Identification of Collaborative Robots Using a Three-Loop Iterative Method

An Iterative Approach for Accurate Dynamic Model Identification of Industrial Robots

Dynamic parameters and friction model identification of an industrial hybrid robot

Joint torque estimation for the human arm from sEMG using backpropagation neural networks and autoencoders

A Backpropagation Learning Method for Dynamic Parameter Identification of Industrial Robots

An Approach for Identifying Dynamic Parameters in Robotic Systems With Inconsistent Joint Measurements

An Iterative Dynamic Parameter Identification Method Based on Minimum Parameter Set for Collaborative Robots

A Model-Data Compound Driven Method for Compensating Robot Tracking Error

Online Identification of Inertial Parameters of a Robot with Partially Combined Links Using IMU Sensing

A nonlinear robot joint friction compensation method including stick and sliding characteristics

Research of the Stiffness Identification and Error Compensation of Industrial Robot Under Heavy Load

Enhanced Error Compensation Method for Robotic Machining System Via Two-Step Kinematic Parameters Calibration

Parameter Identification of Flexible Robotic Joint Based on Multi-Sensor Information.

End-Effector Force and Joint Torque Estimation of a 7-DoF Robotic Manipulator Using Deep Learning