Abstract:Industrial robots have been extensively used in industry, however, geometric errors mainly caused by connecting rod parameter error and non-geometric errors caused by deflection and friction, etc., limit its application in high-accuracy machining. Aiming at addressing these two types of errors, parametric methods for error compensation based on the kinematic model and non-parametric methods of directly establishing the mapping relationship between the actual and target poses of the robot end-effector are investigated and proposed. Currently both types of methods are mainly offline and will be no longer applicable when the pose of the end-effector in the workspace changes dramatically or the working performance of the robot degrades. Thus, to compensate the positioning error of an industrial robot during long-term operation, this research proposes an adaptive hierarchical compensation method based on fixed-length memory window incremental learning and incremental model reconstruction. Firstly, the correlation between positioning errors and robot poses is studied, a calibration sample library is created, and thus the actively evaluating mechanism of the pose mapping model is established to overcome the problem of the robot' workspace having a differential distribution of error levels. Then, an incremental learning algorithm with fixed-length memory window and an incremental model reconstruction algorithm are designed to optimize the pose mapping model in terms of its parameters and architecture and overcome the problem that the performance degradation of the robot exacerbates the positioning error and affects the applicability of the pose mapping model, ensuring that the pose mapping model runs stably above the target accuracy level. Finally, the proposed method is applied to the long-term compensation case of a Stäubli industrial robot and a UR robot, and compared to state-of-art methods. Verification results show the proposed method reduces the position error of the Stäubli robot from 0.85mm to 0.13mm and orientation error from 0.68° to 0.07°, as well as reduces the position error of the UR robot from 2.11mm to 0.17mm, demonstrating that the proposed method works in real world scenarios and outperforms similar methods.

An ANN-Based Precision Compensation Method for Industrial Manipulators Via Optimization of Point Selection

A Robot Calibration Method Based on Joint Angle Division and an Artificial Neural Network

Graded Error Compensation Method for Heavy-Load Manipulators Based on Laser Tracking Measurement

Simulation of a 7R Manipulator Inverse Calibration by Using an Optimized Neural Network Based on Beetle Antennae Search Algorithm

Robust Kinematic Calibration for Improving Collaboration Accuracy of Dual-Arm Manipulators with Experimental Validation

Torque Limitation Control of Industrial Manipulators Based on General Weighted Least Norm Method

Promoting method for manipulator accuracy based on multi-variable prediction and compensation

An Investigation of Error Compensation for a 6-Dof Industrial Robot Based on Neural Network and Stiffness Modelling

Experimental Analysis on the Effectiveness of Kinematic Error Compensation Methods for Serial Industrial Robots

Optimizing cotton‐picking robotic manipulator and inverse kinematics modeling using evolutionary algorithm‐assisted artificial neural network

Positioning error compensation of an industrial robot using neural networks and experimental study

Research on six-joint industrial robotic arm positioning error compensation algorithm based on motion decomposition and improved CIWOA-BP neural network

Intelligent Hierarchical Compensation Method for Industrial Robot Positioning Error Based on Compound Branch Neural Network Automatic Creation

Precision measurement and compensation of kinematic errors for industrial robots using artifact and machine learning

High-Precision Control of Industrial Robot Manipulator Based on Extended Flexible Joint Model

Improvement of Heavy Load Robot Positioning Accuracy by Combining a Model-Based Identification for Geometric Parameters and an Optimized Neural Network for the Compensation of Nongeometric Errors

A hybrid method using FABRIK and custom ANN in solving inverse kinematic for generic serial robot manipulator

A Model-Data Compound Driven Method for Compensating Robot Tracking Error

Adaptive hierarchical positioning error compensation for long-term service of industrial robots based on incremental learning with fixed-length memory window and incremental model reconstruction

Online Kinematic Calibration of Robot Manipulator Based on Neural Network

A calibration method for enhancing robot accuracy through integration of an extended Kalman filter algorithm and an artificial neural network