Abstract:Robotics in medicine is associated with precision, accuracy, and replicability. Several robotic systems are used in spine surgery. They are all considered shared-control systems, providing "steady-hand" manipulation instruments. Although numerous studies have testified to the benefits of robotic instrumentations, they must address their true accuracy. Our study used the Mazor system under several situations and compared the spatial accuracy of the pedicle screw (PS) insertion and its planned trajectory. We used two cadaveric specimens with intact spinal structures from C7 to S1. PS planning was performed using the two registration methods (preopCT/C-arm or CT-to-fluoroscopy registration). After planning, the implant spatial orientation was defined based on six anatomic parameters using axial and sagittal CT images. Two surgical open and percutaneous access were used to insert the PS. After that, another CT acquisition was taken. Accuracy was classified into optimal, inaccurate and unacceptable according to the degree of screw deviation from its planning using the same spatial orientation method. Based on the type of spatial deviation, we also classified the PS trajectory into 16 pattern errors. Seven (19%) out of 37 implanted screws were considered unacceptable (deviation distances > 2.0 mm or angulation > 5°), and 14 (38%) were inaccurate (> 0.5 mm and ≤ 2.0 mm or > 2.5° and ≤ 5°). CT-to-fluoroscopy registration was superior to preopCT/C-arm (average deviation in 0.9 mm vs. 1.7 mm, respectively, p < 0.003), and percutaneous was slightly better than open but did not reach significance (1.3 mm vs. 1.7 mm, respectively). Regarding pattern error, the tendency was to have more axial than sagittal shifts. Using a quantitative method to categorize the screw 3D position, only 10.8% of the screws were considered unacceptable. However, with a more rigorous concept of inaccuracy, almost half were non-optimal. We also identified that, unlike some previous results, the O-arm registration delivers more accurate implants than the preopCT/C-arm method.

Markerless robotic pedicle screw placement based on structured light tracking

A Robotic System For Spine Surgery Positioning And Pedicle Screw Placement

The pedicle screw accuracy using a robotic system and measured by a novel three-dimensional method

Fully automated determination of robotic pedicle screw accuracy and precision utilizing computer vision algorithms

A Novel Fluoroscopy-Based Robot System for Pedicle Screw Fixation Surgery.

Ultrasound-Based Robot-Assisted Drilling for Minimally Invasive Pedicle Screw Placement

Percutaneous thoraco-lumbar-sacral pedicle screw placement accuracy results from a multi-center, prospective clinical study using a skin marker-based optical navigation system

Improving pedicle screw path planning by vertebral posture estimation

Optimal Pedicle Screw Path Planning from Multi-directional Projections

A Targeting Method for Robot-Assisted Percutaneous Needle Placement under Fluoroscopy Guidance

Robot-Assisted Lumbar Pedicle Screw Placement Based on 3D Magnetic Resonance Imaging

Real-Time Navigation with Guide Template for Pedicle Screw Placement Using an Augmented Reality Head-Mounted Device: A Proof-of-Concept Study

Model-Based Compensation of Moving Tissue for State Recognition in Robotic-Assisted Pedicle Drilling

A New Template and Teleoperation System for Human-Guided Spine Surgery

A Novel Point Set Registration-Based Hand–Eye Calibration Method for Robot-Assisted Surgery

An Optical Tracker Based Registration Method Using Feedback for Robot-Assisted Insertion Surgeries.

Design of an ultrasound-emitting drill guide for freehand pedicle screw navigation

Sensorless based Haptic Feedback Integration in Robot-Assisted Pedicle Screw Insertion for Lumbar Spine Surgery: A Preliminary Cadaveric Study

High-precision surgical navigation using speckle structured light-based thoracoabdominal puncture robot

The applied study of virtual-reality technology for accurate placement of C2 pedicle screws

A Marker-Free 2D Image-Guided Method for Robot-Assisted Fracture Reduction Surgery