Abstract:Robot-assisted decompressive laminectomy is a new strategy in clinical applications. However, a stable contact force between the bone-cutting device and lamina is needed to keep it working correctly, which may be affected by respiration and deformation. The surgeon can adapt to this dynamic process quickly, but the robot could cause a considerable force that may damage the patient. This paper proposes a compensation control method based on a respiration-spine model to first improve the stability of the contact force. The model is established based on human morphology and ventilator parameters for anaesthetised patients. The control method is a combination of a surgery sleeve and active fuzzy control to improve the robustness of the robot. The control of the sleeve is related to the thickness of the bone layer, which can be calculated from the image. Furthermore, the lower boundary of the lamina in the CT image is extracted as a safety constraint that can protect the spinal nerves. Finally, an experiment is conducted to verify the safety constraint and compare the changes in contact force with or without the control method. The statistical experiment shows that the control error is 2.47 N without the force control method, while the force control error is 0.223 N when the target control force is 2 N. The robot will hover on the surface of the spine after completing the laminectomy of the planned area. These results show that the robot can be controlled safely and stably. Note to Practitioners—The purpose of this paper is to propose a stable and safe control method for lamina grinding robots under the influence of breathing and deformation factors. Most previous research only considered one of the two factors, and both factors are considered in this paper. Unlike the surgeon, who has the ability to adapt to physiological movements, the robot may cause a considerable force to be exerted on the device, which may damage the patient. Therefore, a controller based on human experience is longitudinally designed, and position constraints are added in three directions. This application can improve the stability and safety of robot-assisted surgery, which may be suitable for remote surgery and can help rural areas solve the problem of a lack of medical resources. Spinal model bone experiments have been completed and will be tested on animals in the future.

Model-Based Compensation of Moving Tissue for State Recognition in Robotic-Assisted Pedicle Drilling

Force-Position Hybrid Compensation Control for Path Deviation in Robot-Assisted Bone Drilling

Compliant Joint Based Robotic Ultrasound Scanning System for Imaging Human Spine

Pose Accuracy Compensation Technology in Robot-aided Aircraft Assembly Drilling Process

A Biomechanics-Aware Robot-Assisted Steerable Drilling Framework for Minimally Invasive Spinal Fixation Procedures

Development and evaluation of a robotic system for lumbar puncture and epidural steroid injection

Force Perception and Bone Recognition of Vertebral Lamina Milling by Robot-Assisted Ultrasonic Bone Scalpel Based on Backpropagation Neural Network

Six degrees of freedom positioning compensation method of robotic arm-assisted medical bone drilling

Bone Layer Proportion Recognition and Cutting Depth Control Based on Intraoperative Signal Processing in Robotic Laminectomy

A CT Image-Based Virtual Sensing Method to Estimate Bone Drilling Force for Surgical Robots.

Towards Biomechanics-Aware Design of a Steerable Drilling Robot for Spinal Fixation Procedures with Flexible Pedicle Screws

Towards an Autonomous Minimally Invasive Spinal Fixation Surgery Using a Concentric Tube Steerable Drilling Robot

Ultrasound-Based Robot-Assisted Drilling for Minimally Invasive Pedicle Screw Placement

A Stability and Safety Control Method in Robot-Assisted Decompressive Laminectomy Considering Respiration and Deformation of Spine

Sensorless based Haptic Feedback Integration in Robot-Assisted Pedicle Screw Insertion for Lumbar Spine Surgery: A Preliminary Cadaveric Study

A semi-autonomous robot control based on bone layer transition detection for a safe pedicle tapping

State recognition of decompressive laminectomy with multiple information in robot-assisted surgery

Markerless robotic pedicle screw placement based on structured light tracking

A Robotic System For Spine Surgery Positioning And Pedicle Screw Placement

Automatic Spinal Canal Breach Detection During Pedicle Screw Placement

Improving pedicle screw path planning by vertebral posture estimation