Abstract:Successive approximation register (SAR) analog-to-digital converters (ADC) have the advantages of a simple structure, low power consumption and a small area compared with other types of ADCs, and thus, high-performance SAR ADCs have always been a hot research topic in the industry. In this paper, a 12-bit SAR ADC design with calibration using a hybrid RC digital-to-analog converter(RC DAC) structure is proposed to improve the conversion accuracy of the ADC and reduce the circuit area at the same time. The analog supply voltage and reference voltage of the ADC are 3.3 V, and the digital supply voltage is 1.2 V. The ADC adopts a mixed digital–analog design scheme, in which the internal comparator, latch, DAC capacitor array, etc., are analog parts, and the rest of the SAR algorithms and calibration algorithms are all implemented in digital Verilog code, with a conversion accuracy of 0.8 mV and a calibration accuracy of 0.5 LSB. The ADC can be selectively calibrated, and the simulation shows that the accuracy of the calibrated ADC can be guaranteed to be within 2 LSB under a 14 MHz digital clock with a sampling rate of 1 MHz. After simulation at a sampling rate of 1 MHz and an input frequency of 244 Hz sine wave, the effective bit count of the ADC is 9.54 bits and the SFDR is 63.71 dB. The circuit consumes 1.78 mW with a 3.3 V supply voltage. The overall layout core area is 411 μm × 517 μm.

Design of an ADC Based on Compressed Sensing Theory

A 16-Bit 2.5-Ms/s SAR ADC with On-Chip Foreground Calibration

Design of an 8-Channel 12bits 1MSPS SAR ADC

A 15-Bit, 5 MSPS SAR ADC with On-Chip Digital Calibration

A 14-Bit Column-Parallel Two-Step SA ADC with On-Chip Scaled Reference Voltages Self-Calibration for CMOS Image Sensor

A 14-Bit 500-Ms/s Pipelined-SAR ADC in 28-Nm CMOS with Foreground and Background Calibration

A 14-Bit Column-Parallel Two-Step SA ADC with Digital Calibration Based on Scaled References and Redundancy for CMOS Image Sensors

A Code-Pattern-driven Digital Background Calibration Technique for SAR ADCs

A Calibration Scheme for a 800-Ms/s 14 Bit Pipelined ADC in 28-Nm CMOS

Design of a 12-Bit SAR ADC with Calibration Technology

Design of a 0.005mm 2 8.5enob 14.9 Fj/conv-Step SAR ADC for Biomedical Application

A 12-Bit Self-Calibrating SAR ADC Achieving a Nyquist 90.4-Db SFDR

An 18-Bit SAR ADC with Mixed DAC and Capacitive Recombination Calibration

A Nonuniform Quantization Scheme for High Speed SAR ADC Architecture

Design of a 12 bit 5 kS/s SAR ADC

A 100MS/S 12-Bit Coarse-Fine SAR ADC with Shared Split-CDAC.

A 7-bit 900-MS/s 2-Then-3-bit/cycle SAR ADC With Background Offset Calibration

An Oversampling SAR ADC With DAC Mismatch Error Shaping Achieving 105 dB SFDR and 101 dB SNDR Over 1 kHz BW in 55 nm CMOS

A Power-Efficient 16-Bit 1-Ms/s Successive Approximation Register Analog-to-Digital Converter with Digital Calibration in 0.18 Μm Complementary Metal Oxide Semiconductor

A calibration-free 10.7 fJ/conv.-step 12-bit 120-MS/s pipelined SAR ADC in 40nm CMOS

A 62.5 Khz-Bw 92 Db-Sndr Noise-shaping SAR ADC with NS-CAL Method