Abstract:Methanol, as a low-carbon and easily synthesizable fuel, is one of the promising directions for future internal combustion engine (ICE) fuels. However, methanol/diesel engines with high energy substitution ratios exhibit a significant drawback at low loads, namely poor fuel economy, which seriously hinders the development of dual fuel engines. Therefore, this paper conducts an optimization study on the combustion strategy of methanol/diesel in heavy-duty vehicle engines under high energy substitution ratios (70 %) and low loads. Innovatively combines single-hole injection with the direct dual fuel stratification (DDFS) technology. By coupling the longer injection duration of a single hole with higher injection pressure, and tailored combustion strategy adjustments, successfully achieving the goal of optimizing low-load methanol dual fuel engines. The research results indicate that when employing a methanol single-stage injection strategy, setting the start of diesel injection (SODI) of −25°CA after top dead center (ATDC) effectively enhances the combustion efficiency of methanol/diesel, especially when combined with a strategy that the start methanol injection (SOMI) is of −23°CA ATDC. This combination can boost the gross indicated thermal efficiency (ITEg) to 51.95 %. The research on utilizing a methanol two-stage injection strategy found that increasing the methanol premixing appropriately, within the engine's safe range, can effectively enhance ITEg. Specifically, with the methanol pre-injection ratio (MPR) of 10 % and the methanol two-stage injection interval (MII) of 20°CA, ITEg can be improved to 52.07 %. However, excessively of premixing can lead to premature combustion, causing an increase in negative work during the compression stroke and consequently reducing ITEg. This study has unveiled effective solutions for the application of methanol/diesel DDFS technology in the automotive engine field. It offers insights into the selection and optimization of methanol injectors and provides theoretical support and practical references for achieving clean and efficient combustion in engines.

Self‐Thermostatic Internal Combustion Engine—Proton Exchange Membrane Fuel Cell Hybrid Power Generation System Based on Methanol

Engine Performance and Emissions of A Compression Ignition Engine Operating on the Diesel-Methanol Blends

Development of Integrated Thermally Autonomous Reformed Methanol-Proton Exchange Membrane Fuel Cell System

Methanol to power through high-efficiency hybrid fuel cell system: Thermodynamic, thermo-economic, and techno-economic (3T) analyses in Northwest China

Assessment of a methanol-fueled integrated hybrid power system of solid oxide fuel cell and low-speed two-stroke engine for maritime application

A comprehensive assessment of the hybrid power generation system of PEMFC and internal combustion engine based on ammonia decomposition

A hybrid fuel cell system integrated with methanol steam reformer and methanation reactor

Analysis of a hybrid system combining solar-assisted methanol reforming and fuel cell power generation

A Methanol Fuel Processing System with Methanol Steam Reforming and CO Selective Methanation Modules for PEMFC Application

Development of Highly Efficient Methanol Steam Reforming System for Hydrogen Production and Supply for a Low Temperature Proton Exchange Membrane Fuel Cell

Integrated analysis and performance optimization of fuel cell engine cogeneration system with methanol for marine application

Coupling of high-temperature proton exchange membrane fuel cells with methanol steam reforming: Modeling and simulation for an integrated coupled for power generation system

Integration and optimization of methanol-reforming proton exchange membrane fuel cell system for distributed generation with combined cooling, heating and power

Multi-objective optimization of a compression ignition engine using on-board methanol reforming

New Hybrid CHP System Integrating Solar Energy and Exhaust Heat Thermochemical Synergistic Conversion with Dual-Source Energy Storage

Optimization of methanol/diesel dual-fuel engines at low load condition for heavy-duty vehicles to operated at high substitution ratio by using single-hole injector for direct injection of methanol

Carbone-neutral oriented methanol-reforming HT-PEMFC cogeneration based on absorption power refrigeration cycle

Effects of Injection Parameters and EHN Mixing on the Combustion Characteristics of Fueling Pure Methanol in a Compression Ignition Engine

Experimental study of a dual-fuel spark-assisted compression ignition engine with polyoxymethylene dimethyl ether and methanol as fuels

A Study on Compression-Ignition Methanol Engine with Converted Dimethyl Ether as an Ignition Improver.

Experimental investigation on exhaust emissions of a heavy-duty vehicle powered by a methanol-fuelled spark ignition engine under world Harmonized Transient Cycle and actual on-road driving conditions