Abstract:Ammonia can be stored as a liquid under relatively easy conditions (Ambient temperature by applying 10 bar or Ambient pressure with the temperature of 239 K). At the same time, liquid ammonia has a high hydrogen storage density and is, therefore, a particularly promising carrier for hydrogen storage. At the same time, the current large-scale industrial synthesis of ammonia has long been mature, and in the future, it will be possible to achieve a zero-emission ammonia regeneration cycle system by replacing existing energy sources with renewable ones. Ammonia does not contain carbon, and its use in fuel cells can avoid NO x production during energy release. high temperature solid oxide fuel cells can be directly fueled by ammonia and obtain good output characteristics, but the challenges inherent in high temperature solid oxide fuel cells greatly limit the implementation of this option. Whereas PEMFC has gained initial commercial use, however, for PEMFC, ammonia is a toxic gas, so the general practice is to convert ammonia to pure hydrogen. Ammonia to hydrogen requires decomposition under high temperature and purification, which increases the complexity of the fuel system. In contrast, PEMFC that can use ammonia decomposition gas directly can simplify the fuel system, and this option has already obtained preliminary experimental validation studies. The energy efficiency of the system obtained from the preliminary validation experiments is only 34–36%, which is much lower than expected. Therefore, this paper establishes a simulation model of PEMFC directly using ammonia decomposition gas as fuel to study the maximum efficiency of the system and the effect of the change of system parameters on the efficiency, and the results show that the system efficiency can reach up to 45% under the condition of considering certain heat loss. Increasing the ammonia decomposition reaction temperature decreases the system efficiency, but the effect is small, and the system efficiency can reach 44% even at a temperature of 850°C. The results of the study can provide a reference for a more scientific and quantitative assessment of the potential value of direct ammonia decomposition gas-fueled PEMFC.

A comprehensive assessment of the hybrid power generation system of PEMFC and internal combustion engine based on ammonia decomposition

Simulation and Study of PEMFC System Directly Fueled by Ammonia Decomposition Gas

Comprehensive Assessment on a Hybrid PEMFC Multi-Generation System Integrated with Solar-Assisted Methane Cracking

Development of Integrated Thermally Autonomous Reformed Methanol-Proton Exchange Membrane Fuel Cell System

Conceptual design and multi-objective optimization of a hybrid system based on direct ammonia protonic ceramic fuel cell and alkali metal thermal electric converter

Performance evaluation and economic analysis of integrated solid oxide electrolyzer cell and proton exchange membrane fuel cell for power generation

Carbone-neutral oriented methanol-reforming HT-PEMFC cogeneration based on absorption power refrigeration cycle

Analysis of a hybrid system combining solar-assisted methanol reforming and fuel cell power generation

A Methanol Fuel Processing System with Methanol Steam Reforming and CO Selective Methanation Modules for PEMFC Application

Self‐Thermostatic Internal Combustion Engine—Proton Exchange Membrane Fuel Cell Hybrid Power Generation System Based on Methanol

A hybrid combined heat and power system based on PEM fuel cell design for high-speed zero carbon service area

Comprehensive performance analysis and optimization for PEMFC-heat pump combined system considering dual heat source

Techno-economic evaluation and technology roadmap of the MWe-scale SOFC-PEMFC hybrid fuel cell system for clean power generation

Energy efficiency analysis of ammonia-fueled power systems for vehicles considering residual heat recovery

Comprehensive Evaluation of Proton Exchange Membrane Fuel Cell-Based Combined Heat and Power System with Lithium-ion Battery under Rule-Based Strategy

A novel distributed energy system using high-temperature proton exchange membrane fuel cell integrated with hybrid-energy heat pump

Dynamic Modeling and Operation Strategy of an NG-fueled SOFC-WGS-TSA-PEMFC Hybrid Energy Conversion System for Fuel Cell Vehicle by Using MATLAB/SIMULINK

Methanol to power through high-efficiency hybrid fuel cell system: Thermodynamic, thermo-economic, and techno-economic (3T) analyses in Northwest China

Comprehensive performance assessment and multi-objective optimization of high-power proton exchange membrane fuel cell system under variable load

Assessment of a methanol-fueled integrated hybrid power system of solid oxide fuel cell and low-speed two-stroke engine for maritime application

An efficient high-temperature PEMFC/membrane distillation hybrid system for simultaneous production of electricity and freshwater