An Open-Path QCL-based Instrument with Sub-Ppbv Sensitivity for NH3 Eddy Covariance Measurement
Yin Wang,Kai Wang,Peng Kang,Yin Lu,Xiaojie Zhen,Gang Liu,Xunhua Zheng
DOI: https://doi.org/10.5194/egusphere-egu2020-6223
2020-01-01
Abstract:Ammonia (NH3) emissions from farmlands and livestock are attracting more and more attention. There is an urgent need for ground-based instruments that can acquire the spatial and temporal variability in NH3 concentrations and emissions, particularly in field environments where power and shelter are not readily available. However, accurate measurements of atmospheric NH3 is of great challenges due to its reactive nature. Conventional NH3 instruments are subject to drawbacks, such as slow response time, limited precision, intensive maintenance, or high power consumption due to the use of the closed-path tube, optics, and vacuum pump.We have developed an open-path instrument for fast (10 Hz) and sub-ppbv sensitivity measurements of atmospheric NH3 concentration. The instrument is based on second-harmonic (2f) wavelength modulated laser absorption spectroscopy technique (WM-LAS), which employs a distributed-feedback semiconductor quantum cascade laser (DFB-QCL) and a HgCdTe (MCT) photodetector. An open-path Herriott cell configuration with a 0.5 m physical path and 46 m optical path-length is used for selective and sensitive detection of the mid-infrared absorption transition of NH3 at 9.06 μm [1]. There is no delay due to sample adsorption. The instrument has a precision (1σ noise level) of 0.53 ppbv and 0.15 ppbv at a sampling frequency of 10 Hz and 1 Hz, respectively. The entire NH3 instrument has a weight of ~7 kg and dimensions of 84 cm (length) and 20 cm (diameter). It can be powered by rechargeable lithium batteries, with a total power consumption of as low as 50 W. The instrument has strong environmental adaptability and is suitable for field deployment in various environments. It can be used in ground-based or vehicle-based measurements of atmospheric NH3 concentration.With the good performance in terms of response time and precision, this instrument is an ideal tool for NH3 flux measurements based on the eddy covariance (EC) technique [2]. An EC flux system was built based on the open-path ammonia instrument, which also included a CSAT3 sonic anemometer (Campbell Scientific®) and LI-7500 (LICOR®) for water vapor (H2O) and carbon dioxide (CO2) measurements. The system was installed at a rice paddy field with a typical Chinese-style rice-duck symbiosis system in Jiangsu province, China. Experiments showed that the lower detection limit of the EC system for NH3 flux was around 17ng m-2 s-1.References:[1] Miller, D. J., Sun, K., Tao, L., and Zondlo, M. A.: Open-path, quantum cascade-laser-based sensor for high-resolution atmospheric ammonia measurements, Atmos. Meas. Tech., 7, 81–93,2014.[2] McDermitt, D., Burba, G., Xu, L., Anderson, T., Komissarov, A., Riensche, B., Schedlbauer, J., Starr, G., Zona, D., Oechel, W., Oberbauer, S., and Hastings, S.: A new low-power, open-path instrument for measuring methane flux by eddy covariance, Appl.Phys. B, 102, 391–405, 2011.