Abstract:The purpose of this study was to explore the influence and action mechanism of the stress amplitude on the evolution of the deformation behavior of sandstones during multilevel triaxial cyclic loading and unloading (CLU) under varying lower limits of stress (VLLS). To realize this purpose, a conventional triaxial compression test under a confining pressure of 5 MPa and multilevel triaxial CLU tests under VLLS and stress amplitudes of 5, 10, and 15 MPa were independently carried out. By summarizing and analyzing the change patterns of the deformation parameters of sandstones under the different stress amplitudes, the influence law and potential action mechanism of the stress amplitude on sandstones were illustrated. The test results indicated that the increase in stress amplitude provided more opportunity for grain slippage and crack formation in sandstones, causing further softening. As a result, the ratio of the stress at the point when the bearing capacity of the tested sandstones was lost at the postpeak stage to the peak stress decreased, and the elastic modulus decreased while the Poisson's ratio increased. Based on an analysis of the evolution trend of the incremental irreversible strain, the aforementioned phenomena occurred because the change curve of the incremental irreversible strain gradually steepened with increasing stress amplitude, transitioning from a horizontal linear curve to a U-shaped curve. However, during the observed volumetric strain change, stress amplitude increase caused a reduction in cohesion in the sandstones, thus shortening the transition period from expansion to contraction. The sandstones were directly damaged without a transition period when the stress amplitude reached a certain level. Additionally, by generalizing and determining the typical deformation parameters, the process before rock failure was divided into four stages, each with a threshold. When reaching the different thresholds, hardening and softening mechanisms influenced the loading and unloading process in different ways. Combined with fracture analysis, the influence mechanism of the stress amplitude on the deformation behavior of the sandstones entailed that with increasing stress amplitude, the stress threshold was eventually reached. Therefore, the accumulated degradation rate of the mechanical properties attributed to the softening mechanism varied, further changing the microscopic evolution characteristics of sandstone deformation. The research results provide construction guidance in geotechnical engineering.

Effects of Load Duration and Stress Level on Deformation and Particle Breakage of Carbonate Sands

Experimental Study On Particle Breakage Of Carbonate Gravels Under Cyclic Loadings Through Large-Scale Triaxial Tests

Particle Breakage and Deformation of Carbonate Sands with Wide Range of Densities During Compression Loading Process

Particle Breakage and Energy Dissipation of Carbonate Sands under Quasi-Static and Dynamic Compression

Particle Shape Influence on the Deformation Resistance of Carbonate Sands under Drained Condition

Influences Of Stress Paths And Saturation On Particle Breakage Of Rockfill Materials

Cumulative deformations and particle breakage in calcareous sand subjected to drained high-cyclic loading: Experimental investigation

Effects of Particle Size on Crushing and Deformation Behaviors of Rockfill Materials

Shear Band Between Steel and Carbonate Sand Under Monotonic and Cyclic Loading

Effects of Particle Breakage on the Mechanical Behavior of Calcareous Sand Under Confined Compression Tests

Deformation Behavior of Sandstones During Multilevel Cyclic Loading and Unloading under Varying Lower Stress Limits: Effect of Stress Amplitude and Underlying Mechanism

Effect of Load Duration on Particle Breakage and Dilative Behavior of Residual Soil

On Compression Behavior and Particle Breakage of Carbonate Silty Sands

Laws of volumetric deformation and particle breaking of calcareous sand under cyclic loading

Investigating the Effects of the Height-to-Diameter Ratio and Loading Rate on the Mechanical Properties and Crack Extension Mechanism of Sandstone-Like Materials

Experimental Study on the Time-Dependent Oedometric Compression Behavior of Calcareous Sand

Fracturing and Ultimate State of Binary Carbonate Sands

Effects of Stress Lower Limit During Cyclic Loading and Unloading on Deformation Characteristics of Sandstones

Particle breakage and morphology changes of calcareous sands under one-dimensional compression loading

DEM Investigation of the Microscopic Mechanism of Scale Effect of Sandy Gravel Material

Evolution of Particle Breakage and Volumetric Deformation of Binary Granular Soils under Impact Load