Abstract:A line encoder composed of a two-probe reading head an arrayed scale grating stitched by multiple separate gratings was proposed, constructed and evaluated in this research for expanding the measurement range. The scale grating is stitched by multiple separate short gratings fabricated by a holographic lithography that is able to provide sub-micron order grating period. Differing from the conventional stitched grating, in which the gap of the adjacent two gratings should be strictly controlled so that a continuous phase can be ensured, the gap in this research is not necessary to be controlled, neither the gap width nor the phases, by using a two-probe reading head. In contrast to the reading head in conventional linear encoder, the two-probe reading head was designed in such a manner that a collimated laser beam with a diameter of 1mm was divided into two parallels probes (probe A/B) by a specially designed prism lens. These two probes are projected perpendicularly onto the transmission type arrayed scale grating. Taking probe A as an example, after passing the grating, the positive and negative first-order diffraction beams follow a typical grating interferometry principle, including propagating direction changing, co-path by a beam splitter and a polarize for a phase delay module and finally interfere with each other, from which the displacement can be obtained. The two probes propagate along similar optical path. The two probes can ensure as least one can be projected onto the grating. By stitching the two probe outputs suitably, the continuous output of the scale grating can be measured accurately. The jig for stitching the separate gratings was investigated and tested. The two-probe reading head prototype was constructed and evaluated.

Design and Testing of a Linear Encoder Capable of Measuring Absolute Distance

Two-probe Optical Encoder for Absolute Positioning of Precision Stages by Using an Improved Scale Grating

Study of the Method for Measuring Four-Degree-of-Freedom Geometric Errors of a Linear Stage

A High-Precision Five-Degree-Of-Freedom Measurement System Based on Laser Collimator and Interferometry Techniques

Highly accurate, absolute optical encoder using a hybrid-positioning method.

Design and Construction of a Two-Degree-of-freedom Linear Encoder for Nanometric Measurement of Stage Position and Straightness

A Two-Probe Linear Encoder by Using an Arrayed Scale Grating Stitched by Multiple Separate Short Gratings

Calibration of Non-Contact Incremental Linear Encoders Using a Macro–micro Dual-Drive High-Precision Comparator

Position and Out-Of-Straightness Measurement of A Precision Linear Air-Bearing Stage by Using A Two-Degree-Of-Freedom Linear Encoder

A Compact Design of Optical Scheme for a Two-Probe Absolute Surface Encoders

Design and Development of an Optical Encoder with Sub-Micron Accuracy Using a Multiple-Tracks Analyser Grating.

Improvement of Absolute Positioning of Precision Stage Based on Cooperation the Zero Position Pulse Signal and Incremental Displacement Signal

High-resolution and Wide Range Displacement Measurement Based on Planar Grating

An Ultra-Precision Absolute-Type Multi-Degree-of-Freedom Grating Encoder

A Novel Peak Positioning Method for Nanometer Displacement Measurement by Optical Linear Encoder

A novel linear displacement sensor based on double-threshold decoding algorithm

Design and Testing of a Four-Probe Optical Sensor Head for Three-Axis Surface Encoder with a Mosaic Scale Grating

An Integrated High Precision Absolute Angular Displacement Sensor

A compact design of optical scheme for multi-axis positioning surface encoders

Grating Encoder for Wide Range Three-Axis Displacement Measurement

Development of a Reflective Optical Encoder with Submicron Accuracy