Abstract:Tungsten (W) has been selected as the divertor material in ITER based on its promising thermal and mechanical properties. Despite these advantages, continued investigation has revealed W to undergo extreme surface morphology evolution in response to relevant fusion operating conditions. These complications spur the need for further exploration of W and other innovative plasma facing components (PFCs) for future fusion devices. Recent literature has shown that alloying of W with other refractory metals, such as tantalum (Ta), results in the enhancement of key PFC properties including, but not limited to, ductility, hydrogen isotope retention, and helium ion (He+) radiation tolerance. In the present study, pure W and W–Ta alloys are exposed to simultaneous and sequential low energy, He+ and deuterium (D+) ion beam irradiations at high (1223 K) and low (523 K) temperatures. The goal of this study is to cultivate a complete understanding of the synergistic effects induced by dual and sequential ion irradiation on W and W–Ta alloy surface morphology evolution. For the dual ion beam experiments, W and W–Ta samples were subjected to four different He+: D+ ion ratios (100% He+, 60% D+ + 40% He+, 90% D+ + 10% He+ and 100% D+) having a total constant He+ fluence of 6 × 1024 ion m−2. The W and W–Ta samples both exhibit the expected damaged surfaces under the 100% He+ irradiation, but as the ratio of D+/He+ ions increases there is a clear suppression of the surface morphology at high temperatures. This observation is supported by the sequential experiments, which show a similar suppression of surface morphology when W and W–Ta samples are first exposed to low energy He+ irradiation and then exposed to subsequent low energy D+ irradiation at high temperatures. Interestingly, this morphology suppression is not observed at low temperatures, implying there is a D–W interaction mechanism which is dependent on temperature that is driving the suppression of the microstructure evolution in both the pure W and W–Ta alloys. Minor irradiation tolerance enhancement in the performance of the W–Ta samples is also observed.

Effect of Ta Addition on the Fuzz Formation of Additively Manufactured W-based Materials

Tungsten Joining with Copper Alloy and Its High Heat Load Performance

Recent Studies of Tungsten-Based Plasma-Facing Materials in the Linear Plasma Device STEP

Interfaces enhanced plasma irradiation resistance in CrMoTaWV/W multilayer films through blocking He diffusion

Fuzz Nanostructure and Erosion on Tungsten–vanadium Alloys Exposed to Helium Plasma in the STEP Linear Plasma Device

Surface modification of ZrC dispersion-strengthened W under low energy He plasma irradiation

The effect of W2+ irradiation and He+ exposure on W-Ta alloy fabricated via SPS

Synergistic effects of W-Ta alloys exposed to various ELM-like fusion events

Tungsten fuzz: Deposition effects and influence to fusion devices

Suppression of surface microstructure evolution in W and W–Ta alloys during simultaneous and sequential He and D ion irradiation in fusion relevant conditions

Effect of TaC addition on microstructure and microhardness of additively manufactured tungsten

He-ion induced surface morphology change and nanofuzz growth on hot tungsten surfaces

Tensile stress-driven cracking of W fuzz over W crystal under fusion-relevant He ion irradiations

Initial growth of tungsten fuzz induced by bubble-driven surface stress layer under helium irradiation

Molecular dynamics simulation of primary radiation damage in W-Ta alloys: Effect of tantalum

The dependence of tungsten fuzz layer thickness and porosity on tungsten deposition rate and helium ion fluence

Modelling of physical sputtering properties during tungsten fuzz growth under various impact energies on NAGDIS-II

Effects of Transmutation Elements in Tungsten As Plasma-Facing Material

Development of Tungsten As Plasma-Facing Materials by Doping Tantalum Carbide Nanoparticles

Blistering Behavior and Deuterium Retention in Tungsten Vanadium Alloys Exposed to Deuterium Plasma in the Linear Plasma Device STEP

A prospect of using ternary W-5 wt%V-5 wt%Ta alloy manufactured by mechanical alloying and spark plasma sintering as plasma-facing material