Abstract:Scanning Thermal Microscopy (SThM) is one of the most universal methods for probing heat conductivity, interfacial thermal resistance and local temperature of materials and devices with nanoscale resolution. SThM uses a temperature sensitive heated probe with an apex of lateral dimensions ranging from a micrometre down to few nanometers that can contact a studied material or a nanoscale device at an arbitrary point on its surface. The tip-sample contact results in a heat flow from the heated tip to the sample - Qts that reduces a heater temperature Th, that is constantly monitored using a sensitive electronic circuit. SThM primary output signal is the heat flow Qts or a closely related parameter - total heater-sample thermal conductance Gts = Qts/(Th-Ts) where Ts is the temperature of the sample. As the tip scanned in a raster way across the sample surface, SThM output produces “thermal” maps reflecting spatial variations in the local sample thermal conductivity ks with the lateral resolution down to a few nanometers (1). A major challenge is the quantitative interpretation of SThM “thermal” signal as ks is fundamentally entangled with the tip-sample interfacial thermal conductance gif that directly depends on the geometry of the tip-surface contact, a generally unknown value that can also vary significantly during SThM measurements. In this paper we describe three linked approaches that allow to eliminate major variabilities in the SThM measurements as well as produce quantitative measurements of nanoscale thin layers of materials. First, we control the temperature of the sample Ts and the microscope base Tm via actively controlled Peltier heating/cooling elements with ~10 mK precision significantly improving the reproducibility of SThM signal by approximately 10 fold. Secondly, we use simultaneous measurement of shear forces and heat flow between the probe (2). As shear forces directly proportional to the contact area, the correlation observed allowed us to confirm the true ballistic nature of heat transport via nanoscale contacts in such a system, suggesting that even large – sub-micrometer sized contacts are composed by a multiple nanoscale junctions with the size below the mean-free-path of the heat carriers. Shear forces SThM allowed us to eliminate dependence of the SThM output on the most difficult to determine parameter – tip-surface contact geometry. Finally, we present a new paradigm of measurement of thermal conductance in the nanoscale thin layers of materials by producing a nanoscale cross-section of the material or device via SPM-friendly Ar ion polishing producing near-atomically low-angle wedge-shaped flat sections (3), followed by the SThM measurements of total thermal conductance Gts as a function of the wedge thickness t. The decrease of the thermal conductance as a function of edge thickness dGts/dt allows to exclusively determine thermal conductivity of the sample kts, eliminating necessity to know either the tip-sample interfacial thermal conductance gif or layer-substrate thermal conductance, two notoriously unknown parameters that render majority of SThM measurements to be merely qualitative.

Scanning Thermal Microscopy Method for Thermal Conductivity Measurement of a Single SiO2 Nanoparticle

DISCUSSION ON THERMAL CONDUCTIVITY MEA- SUREMENTS ON A MICRO-SCALE USING SCANNING THERMAL MICROSCOPE

Near-field radiation analysis and thermal contact radius determination in the thermal conductivity measurement based on SThM open-loop system

Thermometry and Thermal Transport in Micro/Nanoscale Solid-State Devices and Structures

Raman Scattering Characterization of Transparent Thin Film for Thermal Conductivity Measurement

Measurements of nanoscale thermal properties of materials via Scanning Thermal Microscopy (SThM):Challenges and solutions

Measurement of the Thermal Transport Properties of Dielectric Thin Films Using the Micro-Raman Method

Thermal conductivity measurement of submicrometer-scale silicon dioxide films by an extended micro-Raman method

Research On Thermal Conductivity Measurement Of Submicrometer-Scale Silicon Dioxide Film In Thermal Flow Sensor By Micro-Raman Technique

Nanoscale thermal conductivity of Kapton-derived carbonaceous materials

Raman Study on Thermal Conductivity of Oxide-Coated Silicon Nanowires

Realizing the Accurate Measurements of Thermal Conductivity over a Wide Range by Scanning Thermal Microscopy Combined with Quantitative Prediction of Thermal Contact Resistance.

Thermal conductivity measurements of thin films by non-contact scanning thermal microscopy under ambient conditions

Nanoscale spatial resolution probes for Scanning Thermal Microscopy of solid state materials

A three-probe method for accurate nanoscale thermal transport measurements

Novel Method for Convenient Seebeck Coefficient Measurements on Individual Si Nanowires

Measurement Of Thermal Conductivity Of Buried Oxides Of Silicon-On-Insulator Wafers Fabricated By Separation By Implantation Of Oxygen Technology

Measurement Of The Thermal Conductivities Of Suspended Mos2 And Mose2 By Nanosecond Et-Raman Without Temperature Calibration And Laser Absorption Evaluation

Thermal characterization of thin films: A chip-based approach for in-plane property analysis

In-plane thermal conductivity measurements of Si μ-cantilevers using the suspended thermo-reflectance (STR) technique

Numerical modeling of in-plane thermal conductivity measurement methods based on a suspended membrane setup