Abstract:It is essential to accurately assess and verify the effects of air pollution on human health and the environment in order to develop effective mitigation strategies. More accurate analysis of air pollution can be achieved by utilizing a higherdensity sensor network. In recent studies, the implementation of low-cost sensors has demonstrated their capability to quantify air pollution at a high spatial resolution, alleviating the problem of coarse spatial measurements associated with conventional monitoring stations. However, the reliability of such sensors is in question due to concerns about the quality and accuracy of their data. In response to these concerns, active research efforts have focused on leveraging machine learning (ML) techniques in the calibration process of low-cost sensors. These efforts demonstrate promising results for automatic calibration, which would significantly reduce the efforts and costs of traditional calibration methods and boost the low-cost sensors' performance. As a contribution to this promising research field, this study aims to investigate the calibration transferability between identical low-cost sensor units (SUs) for NO 2 and NO using ML-based global models. Global models would further reduce calibration efforts and costs by eliminating the need for individual calibrations, especially when utilizing networks of tens or hundreds of low-cost sensors. This study employed a dataset acquired from four SUs that were located across three distinct locations within Switzerland. We also propose utilizing O 3 measurements obtained from available nearby reference stations to address the cross-sensitivity effect. This strategy aims to enhance model accuracy as most electrochemical NO 2 and NO sensors are extremely cross-sensitive to O 3 . The results of this study show excellent calibration transferability between SUs located at the same site (Case A), with the average model performance being of R 2 = 0.90 ± 0.05 and RMSE = 3.4 ± 0.9 ppb for NO 2 , and R 2 = 0.97 ± 0.02 and RMSE = 3.1 ± 0.8 ppb for NO. There is also relatively good transferability between SUs deployed at different sites (Case B), with the average performance for NO 2 being R 2 = 0.65 ± 0.08 and RMSE = 5.5 ± 0.4 ppb, and R 2 = 0.82 ± 0.05 and RMSE = 5.8 ± 0.8 ppb for NO. Interestingly, the results illustrate a substantial improvement in the calibration models when integrating O 3 measurements, which is more pronounced when SUs are situated in regions characterized by elevated O3 concentrations. Although the findings of this study are based on a specific type of sensor and sensor model, the methodology is flexible and can be applied to other low-cost sensors with different target pollutants and sensing technologies. Furthermore, this study highlights the significance of leveraging publicly available data sources to promote the reliability of low-cost air quality sensors.

Development and Evaluation of a Robust Temperature Sensitive Algorithm for Long Term NO2 Gas Sensor Network Data Correction

Calibrating Low-Cost Sensors by a Two-Phase Learning Approach for Urban Air Quality Measurement

Feasibility of low-cost particulate matter sensors for long-term environmental monitoring: Field evaluation and calibration

Improving Data Reliability: A Quality Control Practice for Low-Cost PM2.5 Sensor Network

Performance of a Low-Cost Sensor (LCS) Network for Long-Term Indoor and Outdoor PM2.5 Measurements at Rural Communities in Beijing, China

Impact Analysis of Temperature and Humidity Conditions on Electrochemical Sensor Response in Ambient Air Quality Monitoring

Poster Abstract: Robust Calibration for Low-Cost Air Quality Sensors Using Historical Data

Transferability of ML-based Global Calibration Models for NO2 and NO Low-Cost Sensors

Intelligent Calibration and Virtual Sensing for Integrated Low-Cost Air Quality Sensors

Adaptive machine learning strategies for network calibration of IoT smart air quality monitoring devices

From air quality sensors to sensor networks: Things we need to learn

A Method of Zero Self-Modification and Temperature Compensation for Indoor Air Quality Etection Based on a Software Model

Hierarchical network design for nitrogen dioxide measurement in urban environments, part 2: network-based sensor calibration

Research of low-cost air quality monitoring models with different machine learning algorithms

Statistical data pre-processing and time series incorporation for high-efficacy calibration of low-cost NO2 sensor using machine learning

Data-Driven Techniques for Low-Cost Sensor Selection and Calibration for the Use Case of Air Quality Monitoring

STCM: A spatio-temporal calibration model for low-cost air monitoring sensors

On Memory-Based Precise Calibration of Cost-Efficient NO 2 Sensor Using Artificial Intelligence and Global Response Correction

Evaluation of Low-Cost Air Quality Sensor Calibration Models

Leveraging machine learning algorithms to advance low-cost air sensor calibration in stationary and mobile settings

Calibrating networks of low-cost air quality sensors