Abstract:A controlled-strain repeated direction tension (RDT) test is useful for characterizing asphalt mixtures and assessing fatigue cracking accompanied by plastic deformation. The strain curve in a loading cycle of the controlled-strain RDT test is a standard haversine wave with only a tensile portion, whereas the stress curve has a tensile portion and a compressive portion (quasi-compression) because of the viscoelastoplastic nature of the asphalt mixture. Usually the material properties in the tensile stress portion (the tensile properties) are used, while those in the compressive stress portion (the quasi-compressive properties) are neglected. This leads to nonnegligible errors in estimating the dissipated strain energy (DSE) and characterizing the damage (such as cracking and permanent deformation) generated in the material. The objective of this paper is to obtain complete material properties and accurate amounts of dissipation and storage of energy of this test method as the foundation of damage characterization. This paper provides methods to simulate the stress and strain for the tensile and compressive stress portions separately so as to determine the tensile and quasi-compressive properties, respectively. The difference between the tensile and quasi-compressive properties is investigated using statistical analysis. It is found that the tensile properties of an asphalt mixture are different from the quasi-compressive properties due to the crack opening and closure within each loading cycle. The DSE calculated using both the tensile and quasi-compressive properties is larger compared to the traditional method using only the tensile properties, indicating an underestimation of the damage by the traditional method. In addition, the recoverable strain energy (RSE) is investigated to examine the ability of an asphalt mixture to store and recover energy. A new perspective in terms of the integration method is provided to determine the actual amount of the RSE in a loading cycle. DOI: 10.1061/(ASCE)MT.1943-5533.0000586. (C) 2013 American Society of Civil Engineers.

Research on Transversely Isotropic Permeability of Asphalt Pavement: Laboratory Tests and Computational Simulation

Effects of Asphalt Binder Type on Mixing Flowability and Workability Index of Asphalt Mixtures

Study On Dynamic Response Characteristics Of Saturated Asphalt Pavement Under Multi-Field Coupling

Evaluation of Complex Poisson’s Ratio of Aged Asphalt Field Cores Using Direct Tension Test and Finite Element Simulation

Relation of homogeneity and mechanical response of asphalt pavements

Horizontal Homogeneity in Laboratory-Compacted Asphalt Specimens

Characterization of Asphalt Mixtures Using Controlled-Strain Repeated Direct Tension Test

Inverse Engineering Stress-Dependent Resilient Moduli of Cement-Treated Base Materials in Asphalt Pavements Using Falling Weight Deflectometer

Investigation of Dynamic Viscoelastic Characteristics of Permeable Asphalt

Thermal-Mechanical Coupling Analysis of Permeable Asphalt Pavements

Investigation on Three-Dimensional Void Mesostructures and Geometries in Porous Asphalt Mixture Based on Computed Tomography (CT) Images and Avizo

Characteristics of Internal Water Flow Conduction within Asphalt Mixtures Based on Real Three-Dimensional Void Structure

Measurement of Permeability and the Correlation Between Permeability and Strength of Pervious Concrete

Investigation on mesostructural characteristics of different pore types within asphalt mixtures under freeze–thaw cycles using CT scanning technology

Experimental measurements of the moisture diffusion and strength damage mechanism of dense asphalt mixtures

Experimental and Numerical Study of Asphalt Material Geospatial Heterogeneity with Intelligent Compaction Technology on Roads

Dynamic Response of Viscoelastic Asphalt Pavement under Non-uniform Moving Load

Numerical Simulation of Moisture Diffusion in the Microstructure of Asphalt Mixtures

Incorporating the heterogeneity of asphalt mixtures in flexible pavements subjected to moisture diffusion

The time history of dynamic response of permeable asphalt mixture pavement based on PFC2D

Mechanical Behaviors and Meso Analysis of Asphalt Mixtures under Moisture Damage Induced by Hydrodynamic Impacts