Abstract:Fe is a promising implant material but its application is obstructed by the slow degradation rate. The introduction of Mn in Fe offers potential because the Fe-Mn alloy has improved degradation rate and antiferromagnetic behaviour. Nevertheless, the problem of slow degradation rate persists in that alloy. In this study, a heterogeneous bimodal micro/nano-structured Fe-Mn alloy was prepared by mechanical alloying (MA) and laser powder bed fusion (LPBF). In detail, the Fe and Mn powders were mechanically milled, of which the impact energy exerted plastic deformation not only refined the grains to nanometres, but also promoted the solid solution of Mn (austenite forming elements) in Fe, and thus obtaining the nano gamma-austenite grains. And then the nano-structured powders were blended with unmilled Fe-Mn powders which had micro-structured grains to prepare the bimodal-structured powders. Subsequently, the bimodal powders were prepared by LPBF, in which the fast cooling rate maintained the heterogeneous bimodal grain structure. Results showed that the prepared bimodal alloy had a mixture of micro alpha-ferrite grains and nano gamma-austenite grains. The active gamma-austenite grains were predominately anodic while the negative alpha-ferrite grains act as cathodes, between them a galvanic current flow generated to accelerate degradation. More significantly, the mixture of micro-and nano-sized grains enlarged the electrochemical heterogeneity characteristics of the alloy, which not only encouraged the corrosion susceptibility but also increased the destabilization of the passive film, and thus further promoting the degradation propagation. The electrochemical experiments showed that the bimodal alloy corroded at a higher current density of about 50.2 mu A/cm(2) compared with the micro (11 mu A/cm(2)) and nano (18 mu A/cm(2)) groups. In summary, the heterogeneous bimodal Fe-Mn alloy could be a reliable alternative for repairing bone defects.

Mesoporous Carbon as Galvanic-Corrosion Activator Accelerates Fe Degradation

Strong Corrosion Induced by Carbon Nanotubes to Accelerate Fe Biodegradation.

Hydrolytic Expansion Induces Corrosion Propagation for Increased Fe Biodegradation.

Accelerating Corrosion and Improving Mechanical Properties by Heterogeneous Interstitial Carbon in Biodegradable Fe-Mn-C Alloys

Microstructure and Corrosion Behavior of Iron Based Biocomposites Prepared by Laser Additive Manufacturing

Galvanic Corrosion Induced by Heterogeneous Bimodal Grain Structures in Fe-Mn Implant

MnO2 Catalysis of Oxygen Reduction to Accelerate the Degradation of Fe-C Composites for Biomedical Applications

Laser Additively Manufactured Iron-Based Biocomposite: Microstructure, Degradation, and in Vitro Cell Behavior

Accelerated biodegradation of Fe-30Mn-S biocomposite via preferential corrosion of secondary phase

Regulation of Surface Micro-Nano Structure of Porous Fe-Mn Alloy and Evaluation on Its Biological Performance

Selective Laser Melted Fe-Mn Bone Scaffold: Microstructure, Corrosion Behavior and Cell Response

A dual redox system for enhancing the biodegradability of Fe-C-Cu composite scaffold

Accelerated Anode and Cathode Reaction Due to Direct Electron Uptake and Consumption by Manganese Dioxide and Titanium Dioxide Composite Cathode in Degradation of Iron Composite.

Highly Dispersed Cu Produced by Mechanical Stress-Activated Redox Reaction to Establish Galvanic Corrosion in Fe Implant

A Novel Porous Fe/Fe-W Alloy Scaffold with A Double-Layer Structured Skeleton: Preparation, in Vitro Degradability and Biocompatibility

Mechanically Driving Supersaturated Fe–Mg Solid Solution for Bone Implant: Preparation, Solubility and Degradation

Magnetic Energy Drives Mass Transfer Processes to Accelerate the Degradation of Fe-based Implant

Stress-Induced Dual-Phase Structure to Accelerate Degradation of the Fe Implant

Bioceramic enhances the degradation and bioactivity of iron bone implant

Construction of Fe/Ag Galvanic Couple by Mechanochemical In-Situ Reduced Ag to Accelerate the Degradation of Fe-based Implant

In Vivo Degradation and Bone Response of A Composite Coating on Mg-Zn-Ca Alloy Prepared by Microarc Oxidation and Electrochemical Deposition