Abstract:This paper studies the anisotropic properties of shale formations in the shale gas blocks of Pengshui in Chongqing city. Uniaxial and triaxial compression tests on specimens of Longmaxi formation in Shizhu county were carried out. The anisotropy of mechanical properties, strength and failure modes were analyzed. The anisotropic failure mechanisms were revealed. The results show that: (1) Significant anisotropy is observed on the specimens. The elastic modulus parallel to bedding planes is the maximum, and the modulus perpendicular to bedding planes is the minimum. The increasing rate of elastic modulus decreases gradually as the confining pressure increases, while the variation trend of Poisson's ratio with bedding orientations of beta= 0 degrees, 30 degrees, 60 degrees and 90 degrees is opposite. The well-developed pore and microcrack in the bedding planes maybe contribute to these results. (2) The compressive strength of the specimen for beta= 0 degrees is the maximum, the value for beta= 90 degrees is a little less, and the minimum is in the orientation of beta= 30 degrees at the same confining pressure. As the bedding orientation changes, the compressive strength curves present U-shape. The anisotropic compressive strength variations can be better described with the Hoek-Brown failure criterion of different orientations. (3) The anisotropic failure modes are mainly resulted from the anisotropy of failure mechanisms. The strength anisotropy is governed by the anisotropy of failure mechanisms. Under the condition of uniaxial compression, tensile splitting along bedding planes occurs for beta= 0 degrees, sliding failure along bedding planes occurs for beta= 30 degrees, composite shear failure across and along bedding planes occurs for beta= 60 degrees, tensile splitting across bedding planes occurs for beta= 90 degrees. But under the condition of triaxial compression, conjugate shear failure across bedding planes occurs for beta= 0 degrees, sliding failure along bedding planes occurs for beta= 30 degrees, shear failure across bedding planes occurs for beta= 60 degrees and 90 degrees. The layered sedimentary structure and weak cementing strength of bedding planes are the causes of the anisotropy of failure mechanisms. The results can provide references for the wellbore stability analysis of horizontal wells and hydraulic fracturing design in the shale gas exploitation.

Experimental Investigation of Anisotropic Fatigue Characteristics of Shale under Uniaxial Cyclic Loading

Experimental investigation on anisotropic characteristics of carbonaceous slate under uniaxial compression

Mechanical response and energy evolution of interbedded shales subjected to multilevel constant/increasing-amplitude cyclic loading

Anisotropic Strength and Failure Behaviors of Transversely Isotropic Shales: an Experimental Investigation

Asymmetric Failure Mechanisms of Anisotropic Shale under Direct Shear

Anisotropy Characterization of the Elasticity and Energy Flow of Longmaxi Shale under Uniaxial Compression

Anisotropic characteristics of acoustic emission and the corresponding multifractal spectrum during progressive failure of shale under cyclic loading

Anisotropic Characteristics of Crack Initiation and Crack Damage Thresholds for Shale

Anisotropic Characterization of Mechanical Behavior and Fracture Morphology in Marine and Continental Shales under Uniaxial Compression: A Comparative Analysis

Experimental research on anisotropic properties of shale

3D anisotropic microcracking mechanisms of shale subjected to direct shear loading: A numerical insight

Research on the anisotropic fracture behavior and the corresponding fracture surface roughness of shale

Anisotropic Creep Characteristics and Mechanism of Shale under Elevated Deviatoric Stress

Experiment and DEM simulation study on mechanical behaviors of shale under triaxial cyclic loading and unloading conditions

Linear Elastic Fracture Mechanics Characterization of an Anisotropic Shale

Study on the Damage and Failure Process of Prefabricated Hole-Fracture Combination Defects in Shale

Effects of Strain Rate and Bedding on Shale Fracture Mechanisms

Investigation of the anisotropic mechanical response of layered shales

Anisotropic microscale failure mechanism of shale

Discrete element simulation on failure mechanical behavior of transversely isotropic shale under two kinds of unloading paths

Experimental Investigation on the 3D Anisotropic Fracture Behavior of Layered Shales Under Mode-I Loading