Abstract:Microstructural characterization of a vanadium carbide (V2C and V8C7) surface compound layer was performed by electron backscatter diffraction (EBSD), scanning electron microscopy and transmission electron microscopy. The phase composition and phase distribution of the compound layer and the morphologies, grain sizes and crystallographic orientations of the vanadium carbides were investigated through elemental distribution and crystallographic analyses. The results indicated that the compound layer was composed of four distinct zones consisting of a compact and uniform V2C layer (thickness of 3.2 mu m) over the topmost surface followed by a nonuniform V + V2C (2.4 mu m) zone, a V8C7 layer (10.7 mu m) and a relatively deep V2C + V8C7+alpha-Fe + Fe3C zone (23.2 mu m). The V2C layer was found in the V-rich region, and the EBSD results revealed that this phase grew mainly along the {0001} and {11-20} orientations. However, the V8C7 phase appeared to be nearly random, which indicates that the growth of this phase had no specific orientation. The V2C and V8C7 phases exhibited low-angle grain boundaries, and their misorientation angle distributions were mainly concentrated within the range of 0-5 degrees. Furthermore, nanoindentation tests demonstrated that the hardnesses of the V2C and V8C7 layers were 22.16 +/- 0.52 and 32.42 +/- 0.61 GPa, respectively. Examination of the vanadium carbide powders obtained by chemical extraction indicated that the V2C grains with a hexagonal structure exhibited equiaxial and short rod-like morphologies, and the V8C7 particles with a cubic structure possessed short rod-like and spherical morphologies. (C) 2018 Elsevier B.V. All rights reserved.

Characterization of gradient vanadium carbide coating using synchrotron X-ray microdiffraction

The microstructure evolution of VC coatings on AISI H13 and 9Cr18 steel by thermo-reactive deposition process

Effects Of Wc Crystal Characteristics On Microstructure And Mechanical Property Of Hvof-Sprayed Wc-Cocr Coatings

Evaluation of Vanadium Carbide Coatings on AISI H13 Obtained by Thermo-Reactive Deposition/diffusion Technique

STUDY ON PREPARATION AND PROPERTIES OF VANADIUM CARBIDE COATING

On the Formation and Properties of Chromium Carbide and Vanadium Carbide Coatings Produced on W1 Tool Steel Through Thermal Reactive Diffusion (TRD)

MICROSTRUCTURE AND WEAR RESISTANCE OF CHROMIUM CARBIDE COATING IN SITU SYNTHESIZED BY VEB

Role of V(C, N) on gradient structure formation and mechanical properties of nanocrystalline cemented carbides

Preparation and electrochemical properties of gradient CrNx coatings on H13 steel

Thermo-reactive deposition processed vanadium carbide coating: Growth kinetics model and diffusion mechanism

Evolution of CrCx Ceramic Induced by Laser Direct Energy Deposition Multilayered Gradient Ni204-dr60 Coating

Microstructural Characterization of a V2C and V8C7 Ceramic-Reinforced Fe Substrate Surface Compound Layer by EBSD and TEM

Investigation on Microstructure and Wear Properties of an <i>In Situ</i> Synthesized TiC Gradient Coating

Sintering behavior of WC-10Co-V(C, N) nanocrystalline gradient cemented carbide

Grain Size and Adhesion Strength of the V<sub>8</sub>C<sub>7</sub> Coatings Produced <i>In Situ</i>

Investigation of Chromium and Vanadium Carbide Composite Coatings on CK45 Steel by Thermal Reactive Diffusion

Formation Kinetics and Properties of CrNx/H13 Functionally Graded Coating Fabricated by PVD

In-situ synthesis of chromium carbide coating by VEB

Phase Structure and Fine Microstructure of In-Situ Vanadium Carbides in Cast High-Vanadium High-Speed Steel

Effect of Si doping on structure and properties of CrAlN nanometer hard coatings

Microstructure and Formation Mechanism of Vanadium Carbide-Reinforced Iron-Matrix Composites Prepared by Solid-Phase Diffusion