Abstract:For parts of machines and equipment operating under the influence of aggressive media, abrasive, high temperatures, the creation of a hard, wear-resistant surface is an urgent task. Cobalt is used as a binder to create hard alloy materials that work under these conditions. It was of interest to evaluate the possibility of using cobalt as an additive in complex thermal diffusion chromium plating of structural steel. The article describes the features of thermal diffusion saturation of steel X35CrNi2-3 with chromium and cobalt at a temperature of 1000°C. A technique for analyzing the obtained coating is presented, based on the possibilities of X-ray spectral microanalysis of the diffusion layer on transverse microsections of the obtained samples. The elemental composition of the diffusion layer was monitored using the JEOL JSM-6460 LV universal scanning (scanning) electron microscope. The microstructure was studied using the optical metallographic microscope Axio Observer D1.m. The X-ray phase analysis was carried out with the Rigaku Ultima IV diffractometer. The hardness measurement was carried out with the FM-800 microhardness tester at a load of 50 g. Data were obtained on the distribution of chromium and cobalt in the surface layer of steel. It is shown that the resulting thermal diffusion coating consists mainly of a substitutional solid solution based on Cr‒Fe‒Co with bcc lattice and chromium carbides. The average diffusion coefficients of chromium in the α-phase of chromium were determined to be DCr = 3,22·10‒15 м2/с; in the γ-phase of iron DCr = 9,41·10‒15 м2/с. The diffusion coefficient of cobalt in the γ-phase of iron DCo = 7,89·10‒15 м2/с. The depth of the outer coating on the sample was about 15–20 μm, the depth of the diffusion layer of chromium in the base metal was about 70 μm, and that of cobalt was about 40 μm. The maximum hardness of the outer surface layer was 1740 HV, the diffusion layer in the base metal was 900–560 HV, and the base metal was about 510 HV.

Growth Kinetics and Microstructure of Composite Coatings on H13 by Thermal Reactive Diffusion

Investigation of Chromium and Vanadium Carbide Composite Coatings on CK45 Steel by Thermal Reactive Diffusion

Diffusion mechanism in molten salt baths during the production of carbide coatings via thermal reactive diffusion

Effects of Heat Treatment on Structure Transformation of Cr/Al Composite Coatings

Preparation of Al-Cr-Fe Coatings by Heat Treatment of Electrodeposited Cr/Al Composite Coatings

On the Formation and Properties of Chromium Carbide and Vanadium Carbide Coatings Produced on W1 Tool Steel Through Thermal Reactive Diffusion (TRD)

Tribological Properties of Duplex Coatings of Chromium-Vanadium Carbide Produced by Thermo-Reactive Diffusion (TRD)

Evaluation of Vanadium Carbide Coatings on AISI H13 Obtained by Thermo-Reactive Deposition/diffusion Technique

The microstructure evolution of VC coatings on AISI H13 and 9Cr18 steel by thermo-reactive deposition process

INVESTIGATION OF CHROMIUM AND VANADIUM CARBIDE COATING FORMATION ON SKD11 AND T10 BY THERMO-REACTIVE DIFFUSION (TRD) METHOD

Formation Kinetics and Properties of CrNx/H13 Functionally Graded Coating Fabricated by PVD

Relationship among Thermodynamic, Growth Kinetics, and Microstructure Characterization of the Simple and Silicon‐Modified Aluminide Coating on Ni‐based Superalloy

Thermo-reactive deposition processed vanadium carbide coating: Growth kinetics model and diffusion mechanism

THE CHROMIUM AND COBALT DISTRIBUTION IN THE DIFFUSION LAYER OF STEEL X35CrNi2-3 DURING THERMОDIFFUSION SATURATION

Influence of the Composition of Saturating Mixture on the Depth of Diffusion of Chromium and the Coating Structure During Chromovanadizing

Microstructures and Mechanical Properties of (Ti,Cr)N Composite Coatings Grown by Arc Ion Plating

MICROSTRUCTURE CHARACTERISTICS OF Cr3C2-NiCr COATINGS DEPOSITED WITH THE HIGH-VELOCITY OXY-FUEL THERMAL-SPRAY TECHNIQUE

Thermodynamics and Kinetics of Borochromized Coatings Prepared on 5CrNiMo Steel by Thermo-Reactive Diffusion

Study of Microstructure, Vickers Microindentation and Microhardness Distribution of HVOF Sprayed Composite MoB/CoCr Coating

Growth Process and Mechanism of Hot-Dip Galvanised Zn–5Al Coating on Steel

Microstructural Modelling Solution for Complex Co Based Alloys and Coatings