Improved Cycling Stability of LiCoO2 at 4.5 V Via Surface Modification of Electrodes with Conductive Amorphous LLTO Thin Film

Shipai Song,Xiang Peng,Kai Huang,Hao Zhang,Fang Wu,Yong Xiang,Xiaokun Zhang

DOI: https://doi.org/10.1186/s11671-020-03335-8

2020-01-01

Nanoscale Research Letters

Abstract:The stability issue of LiCoO 2 cycled at high voltages is one of the burning questions for the development of lithium ion batteries with high energy density and long cycling life. Although it is effective to improve the cycling performance of LiCoO 2 via coating individual LiCoO 2 particles with another metal oxides or fluorides, the rate capacity is generally compromised because the typical coating materials are poor conductors. Herein, amorphous Li 0.33 La 0.56 TiO 3 , one of the most successful solid electrolytes, was directly deposited on the surface of made-up LiCoO 2 electrodes through magnetron sputtering. Not only the inherent conductive network in the made-up LiCoO 2 electrodes was retained, but also the Li + transport in bulk and across the cathode-electrolyte interface was enhanced. In addition, the surface chemical analysis of the cycled LiCoO 2 electrodes suggests that most of the stability issues can be addressed via the deposition of amorphous Li 0.33 La 0.56 TiO 3 . With an optimized deposition time, the LiCoO 2 electrodes modified by Li 0.33 La 0.56 TiO 3 performed a steady reversible capacity of 150 mAh/g at 0.2 C with the cut-off voltage from 2.75 to 4.5 V vs. Li + /Li, and an 84.6% capacity gain at 5 C comparing with the pristine one.